Author Topic: dvd player problem!!! no disc !! (Read 1433 times)

yob_floria · « **on:** July 21, 2009, 01:02:13 AM »

ano po ang cause nito? no disc kahit may nakalagay na disc sa loob nang player?..pls help...tia...

Philippine Electronics Forum · « **on:** July 21, 2009, 01:02:13 AM »

Ugin · « **Reply #1 on:** July 21, 2009, 01:22:15 AM »

check the laser head if theres an emission. If yes, then check the spindle motor. Dapat tama ang RPM nya. Yung spindle motor ang kadalasan nasisira sa mga DVD lalo na pag galing china...

Philippine Electronics Forum · « **Reply #1 on:** July 21, 2009, 01:22:15 AM »

yob_floria · « **Reply #2 on:** July 21, 2009, 09:00:51 AM »

Quote from: PIC Beginner on July 21, 2009, 01:22:15 AM

check the laser head if theres an emission. If yes, then check the spindle motor. Dapat tama ang RPM nya. Yung spindle motor ang kadalasan nasisira sa mga DVD lalo na pag galing china...

naicheck ko ang laser ok naman. naicheck ko rin spindle motor with multitester umiikot naman..di ko lang alam kong tama pa ba ang rpm niya. papalitan ko na lang nang bagong motor..thanks for d great advice ha..

Philippine Electronics Forum · « **Reply #2 on:** July 21, 2009, 09:00:51 AM »

sEPh · « **Reply #3 on:** July 21, 2009, 03:38:17 PM »

also check ribbon wire..

Philippine Electronics Forum · « **Reply #3 on:** July 21, 2009, 03:38:17 PM »

oldskul · « **Reply #4 on:** July 21, 2009, 06:55:42 PM »

gagana talaga yun pag tinester mo pero wala na sa rpm yun...subukan mo muna pagpalitin yung 2 motor,,baka wala na sa RPM yung spindle motor mo...ipalit mo muna yung motor para sa close/open...kapag gumana yun,meaning sira yung spindle motor mo....gudlak!!!

Philippine Electronics Forum · « **Reply #4 on:** July 21, 2009, 06:55:42 PM »

cyber_maniac · « **Reply #5 on:** July 28, 2009, 11:14:25 PM »

ano po ibat-ibang parts ng dvd?may alam po ba kayong website kng saan may pictures with label ung parts ng dvd?at tsaka mga troubleshooting guides on dvd...sana po may mgreply..salmat ng marami!

Philippine Electronics Forum · « **Reply #5 on:** July 28, 2009, 11:14:25 PM »

Philippine Electronics Forum