Yung sa E-gizmo is only a CPLD/FPGA on a board. You can program it with the accompanying programming parallel cable. You can access the CPLD/FPGA pin via terminal connectors.
While the one found in BEST ( http://bestinc.ph/products.php?c=0&p=42
) is already a CPLD/FPGA development kit that comes with the programming cable, four 7-seg display, 8 LEDs, 8 DIP switches, 5 push button switches, an RS-232 port and a manual with sample codes for each component modules. You can also order separately a ADC/DAC module for the kit. BEST also gives demonstration and free seminar in using the CPLD/FPGA development kit.
So if you already know how to use a CPLD/FPGA, I suggest go for the E-gizmo module (a lot cheaper) but if you are just starting then go for the development kit of BEST.