caramoan tour package

caramoan tour package

Author Topic: need help my projector  (Read 1809 times)

Offline danny

  • Technical People
  • Solar Power Satellite
  • *****
  • Posts: 5490
  • Pogi/Ganda Points: 323
  • Gender: Male
Re: need help my projector
« Reply #20 on: March 17, 2010, 10:35:32 PM »
You will need the exact part for that.
the problem is, I don't have a service manual for this one.
We need the exact  part number. I am not sure kung meron sa pinas niyan
I can ask our other engineers here kung may alam sila about this.

I open my old projector pero iba.
mine uses a 3 chip LCD at yung isa ang may tama
as in nasunog mismo yung material din.

I will keep you posted ulit.
can you please verify the model number sa unit mo
yung binigay mo na model number ay nde ko ma research
dito sa us.
danny

Philippine Electronics Forum

Re: need help my projector
« Reply #20 on: March 17, 2010, 10:35:32 PM »

Offline chuix24

  • CR2032 Battery
  • **
  • Posts: 27
  • Pogi/Ganda Points: 0
Re: need help my projector
« Reply #21 on: March 17, 2010, 11:19:28 PM »
sir danny

i really cannot find those model number.. hence i found this . OPT(optimum Projection Technology by Lightware. printed infront.. while at the bottomof the projector a logo og imengine, scout Lightware  beaverton, Or USA , and while at the bar  code LWBTQA000003 and also i found this E182454 Listed I.T.E.

these are all infos i found.. thanks...

Philippine Electronics Forum

Re: need help my projector
« Reply #21 on: March 17, 2010, 11:19:28 PM »

Offline danny

  • Technical People
  • Solar Power Satellite
  • *****
  • Posts: 5490
  • Pogi/Ganda Points: 323
  • Gender: Male
Re: need help my projector
« Reply #22 on: March 17, 2010, 11:41:19 PM »
ok i will check that out
ask ko din dito sa office namin
kung cno na ang naka kita nito
i will keep u posted
thanks  ;D
danny

Philippine Electronics Forum

Re: need help my projector
« Reply #22 on: March 17, 2010, 11:41:19 PM »

Offline chuix24

  • CR2032 Battery
  • **
  • Posts: 27
  • Pogi/Ganda Points: 0
Re: need help my projector
« Reply #23 on: March 17, 2010, 11:42:56 PM »
thanks sir.. more power... i need to know it badly hehehehehe

Philippine Electronics Forum

Re: need help my projector
« Reply #23 on: March 17, 2010, 11:42:56 PM »

Offline danny

  • Technical People
  • Solar Power Satellite
  • *****
  • Posts: 5490
  • Pogi/Ganda Points: 323
  • Gender: Male
Re: need help my projector
« Reply #24 on: March 17, 2010, 11:51:37 PM »
ok  :)
danny

Philippine Electronics Forum

Re: need help my projector
« Reply #24 on: March 17, 2010, 11:51:37 PM »

Offline chuix24

  • CR2032 Battery
  • **
  • Posts: 27
  • Pogi/Ganda Points: 0
Re: need help my projector
« Reply #25 on: March 19, 2010, 06:15:27 PM »
mga sir

kanina tinatry ko na lagyan ng ir filter using diy na filter (floppy disk) kaso wala pa rin di po gumana.. so im thinking for a heat shield baka heat shield to para di masubog ung lcd kasi cya ung nakalagay bago ang lcd and fresnel.. anything na |DIY na heat shield or uv filter help please...

Philippine Electronics Forum

Re: need help my projector
« Reply #25 on: March 19, 2010, 06:15:27 PM »

 

Privacy Policy

Contact Us: elabph@yahoo.com