Author Topic: SANYO T.V 21"need help... (Read 1267 times)

Afro_tech · « **on:** May 06, 2010, 10:44:44 AM »

hello po sa lahat na matitinik sa television dito...

tolong nman sa t.v na ito...

Brand:Sanyo 21"
Model:ST-21C18
Chassis #:97-2118SW-PH12

problem.. pag power on.unti unting lumiit yung picture..hanngang single line na lang sa screen..

action taken:resolder possible lose contact..no luck..
change vertical ic TA-8403 still no luck..

ano kaya sira nito mga master...

Philippine Electronics Forum · « **on:** May 06, 2010, 10:44:44 AM »

pete · « **Reply #1 on:** May 06, 2010, 10:52:04 AM »

nagpalit na po ba kayo ng Elec. capacitor dyan sa vertical kadalasan yan lang ang salarin

Philippine Electronics Forum · « **Reply #1 on:** May 06, 2010, 10:52:04 AM »

MX45 · « **Reply #2 on:** May 06, 2010, 11:15:22 AM »

Quote from: pete on May 06, 2010, 10:52:04 AM

nagpalit na po ba kayo ng Elec. capacitor dyan sa vertical kadalasan yan lang ang salarin

Agreed... palitan mo na yang electrolytic cap sa vertical section. tapos update ka ulit d2.

Philippine Electronics Forum · « **Reply #2 on:** May 06, 2010, 11:15:22 AM »

Triple_D · « **Reply #3 on:** May 07, 2010, 04:05:06 PM »

strongly agree kay master pete and ccasiser,
direct replaced mo na electrolytic caps sa vertical section.

Philippine Electronics Forum · « **Reply #3 on:** May 07, 2010, 04:05:06 PM »

pEN DoTA · « **Reply #4 on:** May 07, 2010, 07:35:44 PM »

before kau nag replace ng vertical ic be sure na bago lahat ng e caps mo near that ic, mura lng nman yun

Philippine Electronics Forum · « **Reply #4 on:** May 07, 2010, 07:35:44 PM »

pete · « **Reply #5 on:** June 07, 2010, 10:14:55 AM »

update pls

DSM_elektronix_shop · « **Reply #6 on:** June 21, 2010, 09:14:34 PM »

agreed e-caps yan.....kalimitan 100uf/50v ...

tahah14 · « **Reply #7 on:** June 22, 2010, 12:47:32 PM »

mata oste tama agree sa mga masters ecaps muna around vertical ic gudluck ...

MX45 · « **Reply #8 on:** June 22, 2010, 05:36:21 PM »

nawala na yung TS..baka nag good na.

pEN DoTA · « **Reply #9 on:** June 22, 2010, 08:27:01 PM »

ano update mo t.s?

Afro_tech · « **Reply #10 on:** July 05, 2010, 10:55:22 AM »

closed thread na po ito mga bro...

tama po kayo..pinalitan ko lang yung mga capacitor malapit sa vertical ic..

2 pcs..100uf/35v
1 pc.10uf/100v
1 pc.470uf/35v

yan po ang pinalitan ko..

pete · « **Reply #11 on:** November 17, 2010, 10:06:59 PM »

Quote from: Afro_tech on July 05, 2010, 10:55:22 AM

closed thread na po ito mga bro...

tama po kayo..pinalitan ko lang yung mga capacitor malapit sa vertical ic..

2 pcs..100uf/35v
1 pc.10uf/100v
1 pc.470uf/35v

yan po ang pinalitan ko..

ha ganun lang yun.... ang lagay ba e hehehe pogi mo naman.

enriz622 · « **Reply #12 on:** November 24, 2010, 07:00:58 PM »

naka suot yata ng gloves di niya mapindot

NORTH LUZON · « **Reply #13 on:** November 24, 2010, 07:06:03 PM »

Quote from: Afro_tech on July 05, 2010, 10:55:22 AM

closed thread na po ito mga bro...

tama po kayo..pinalitan ko lang yung mga capacitor malapit sa vertical ic..

2 pcs..100uf/35v
1 pc.10uf/100v
1 pc.470uf/35v

yan po ang pinalitan ko..

bakit may 10uf by 100v dito?
hehhehehehehe

m@r · « **Reply #14 on:** November 24, 2010, 09:53:31 PM »

sa ecaps lang pala nadali na... vertical ic pa unang pinalitan... pero ok na rin yon... charge to experience... nice one...

Philippine Electronics Forum · « **Reply #14 on:** November 24, 2010, 09:53:31 PM »

Author Topic: SANYO T.V 21"need help... (Read 1267 times)

Philippine Electronics Forum

Philippine Electronics Forum

Philippine Electronics Forum

Philippine Electronics Forum

Philippine Electronics Forum

Philippine Electronics Forum