Author Topic: no display but with backlight and sound. (Read 1171 times)

mysticgirl · « **on:** April 13, 2008, 01:59:00 AM »

ilang beses n nabagsak cel ko tpos one day wla n syang display, pero may backlight at sound. madali lng b ayusin to, im not a cp tech but curious enough to tinker with it. can u help me pls.

Philippine Electronics Forum · « **on:** April 13, 2008, 01:59:00 AM »

jr_agustin2008 · « **Reply #1 on:** April 13, 2008, 02:07:56 AM »

anung celfone po ba ung nabagsak mo?

Philippine Electronics Forum · « **Reply #1 on:** April 13, 2008, 02:07:56 AM »

mysticgirl · « **Reply #2 on:** April 16, 2008, 04:38:33 AM »

sori late reply. its an old fone, 6610i. d ko n sya ginagamit pero sayang nmn.bka pwd nu ko tulungan ayusin un. thanks po.

Philippine Electronics Forum · « **Reply #2 on:** April 16, 2008, 04:38:33 AM »

manz.com · « **Reply #3 on:** May 01, 2008, 06:27:44 AM »

try mo baklasin madam...baka lumuwag lang pagkakabit sa may LCD connector bandang itaas.

Philippine Electronics Forum · « **Reply #3 on:** May 01, 2008, 06:27:44 AM »

kirk simone · « **Reply #4 on:** May 01, 2008, 02:13:11 PM »

before opening the phone pls try to power on the phone then dial 112
try to listen if a recorded voice is heard
-if yes
then the diffective is either the lcd connector or the the lcd itself
-if no
then software is the problem and need to be formatted/flash

Philippine Electronics Forum · « **Reply #4 on:** May 01, 2008, 02:13:11 PM »

Ikasamoko · « **Reply #5 on:** May 01, 2008, 03:16:41 PM »

Quote from: mysticgirl on April 13, 2008, 01:59:00 AM

...pero may backlight at sound.

Hardware...lcd connector or lcd na mismo...

ahlburuto · « **Reply #6 on:** May 01, 2008, 03:55:58 PM »

hmmmmm.... kung nakailang bagsak na yan eh malamang lcd connector yan or lcd mismo. minsan natanggal yung pagkakahinang ng lcd connector sa board kaya medyo mahirap ikabit yun. dapat meron kang magnifying glass or microscope...

BR

mArKhAo · « **Reply #7 on:** May 31, 2008, 02:20:39 PM »

loose connection lng yan.

Philippine Electronics Forum · « **Reply #7 on:** May 31, 2008, 02:20:39 PM »

Philippine Electronics Forum