Author Topic: Atmel AT89C2051 (Read 590 times)

RiDdLeR??? · « **on:** October 12, 2010, 01:02:23 PM »

Mga masters,

Anong compiler ba ang ginagamit para sa AT89C2051?

At anong h/w programmer din ang gamit?

TIA

Philippine Electronics Forum · « **on:** October 12, 2010, 01:02:23 PM »

rdpzycho · « **Reply #1 on:** October 12, 2010, 03:46:23 PM »

SDCC ang ginagamit ko sir, though meron din ang Keil at IAR, mas gusto ko 'yung simplicity ng SDCC. kung gusto niyo meron pa ring IDE sir, MIDE-51 'yung SDCC na meron ng IDE.

tapos meron akong homemade na programmer based dito sa link (though 'yung main IC pre-programmed sa Superpro sa opisina).

http://chaokhun.kmitl.ac.th/~kswichit/easy1/easy.htm

Philippine Electronics Forum · « **Reply #1 on:** October 12, 2010, 03:46:23 PM »

Dandy · « **Reply #2 on:** October 12, 2010, 04:40:52 PM »

Sa akin at ang friend ko
IDE with compiler : Acebus - Assembly lang po puwede
   BASCOM - mixed Assembly at saka Basic
   Keil - C and Assembly
   Ladder - Graphical programming

Ang mga IDE na ito ay mayroon na build in na compiler. Puwede kahit anong compiler ang gagamiting mo basta ang compiled code ay HEX o kaya BIN file, na puwede gamitin ng programmer para i burn sa MCU ROM.

Programmer : AT89 Flash MCU Programmer
see this link : http://s328.photobucket.com/player.swf?file=http://vid328.photobucket.com/albums/l336/myphotoloader/Programmer/HSAT89Flash8051MCUProgrammer.flv&fs=1&os=1&ap=1

Itong programmer na ito, hindi niya support ang ISP programming ng AT89C2051 (support only HEX File), iyong puwedeng i-programmed ang IC na naka-kabit sa board, pero puwede support niya ang AT89LP2052, ang bagong AT89C2051 na high speed at ISP programming.

Magsisimula ka po na pag-aralan ang AT89C2051 programming?

Philippine Electronics Forum · « **Reply #2 on:** October 12, 2010, 04:40:52 PM »

romel_emperado · « **Reply #3 on:** May 24, 2011, 10:52:42 PM »

bakit ano ba yang SDCC? @sis alyas keil gamit ko dyan

alam ko compiler yang SDCC pero di ko pa nagamit yan... ano ba advantage ng SDCC over keil?

ang gusto ko lang kasi sa keil pagdating sa specific register na nakikita mo sa datasheet yun na dina and syntax during programming...

pasenxa di ako nakagamit ng ibang compiler.. newbie lang po

Philippine Electronics Forum · « **Reply #3 on:** May 24, 2011, 10:52:42 PM »

rdpzycho · « **Reply #4 on:** May 24, 2011, 11:22:06 PM »

SDCC = legally free, no cracks needed.

simplicity = as simple as possible, wala ng palamuti. minsan mas gusto ko ngang text editor lang at command line compile.

Philippine Electronics Forum · « **Reply #4 on:** May 24, 2011, 11:22:06 PM »

romel_emperado · « **Reply #5 on:** May 25, 2011, 08:18:33 AM »

ah.. okay.. balik tayo sa topic...

may nakita kasi akong programmer para dito sa at89c2051 ginawa ko naman pero hindi successful... may available ba kayo dyan na tested na?

MX45 · « **Reply #6 on:** May 25, 2011, 09:39:01 AM »

subscribing..

1diyMARKET · « **Reply #7 on:** May 25, 2011, 09:59:12 AM »

Quote from: romel_emperado on May 25, 2011, 08:18:33 AM

ah.. okay.. balik tayo sa topic...

may nakita kasi akong programmer para dito sa at89c2051 ginawa ko naman pero hindi successful... may available ba kayo dyan na tested na?

see this programmer, proven working and has been used in many University in the Philippines and India : http://www.1diycentre.com/MCU_files/Page735.htm

This programmer comes also with Tagalog software on Windows (only) talagang gawa ng pinoy, not ok with ubunto.

OT na, for cross reference on the 8051 core, see this topic http://www.electronicslab.ph/forum/index.php?topic=26212.0
There are high speed 8051 that comes with Analog to Digital and easy to program, pin to pin compatible with the AT89C2051 with lots of ROM, like 8K, 12K, 16K of ROM

romel_emperado · « **Reply #8 on:** May 25, 2011, 10:51:54 AM »

Quote from: 1diyMARKET on May 25, 2011, 09:59:12 AM

see this programmer, proven working and has been used in many University in the Philippines and India : http://www.1diycentre.com/MCU_files/Page735.htm

This programmer comes also with Tagalog software on Windows (only) talagang gawa ng pinoy, not ok with ubunto.

OT na, for cross reference on the 8051 core, see this topic http://www.electronicslab.ph/forum/index.php?topic=26212.0
There are high speed 8051 that comes with Analog to Digital and easy to program, pin to pin compatible with the AT89C2051 with lots of ROM, like 8K, 12K, 16K of ROM

wait sis naguguluhan ako dito.. DIY ba to at may kasama ng software?
wala kasing price nakalagay... hmm

http://www.1diycentre.com/MCU_files/Page735.htm

1diyMARKET · « **Reply #9 on:** May 25, 2011, 08:12:41 PM »

Quote from: romel_emperado on May 25, 2011, 10:51:54 AM

wait sis naguguluhan ako dito.. DIY ba to at may kasama ng software?
wala kasing price nakalagay... hmm

http://www.1diycentre.com/MCU_files/Page735.htm

Puwede diy (pcb + pards + cables)
Puwede din complete assembled and fully tested

Kasama na iyong windows software

Iyon palang AT89C2051, kailangan mo ang ZIF socket para ma program mo, kasi di pala ISP itong IC na ito. Ang ISP version pala ay yong AT89S2051 o kaya AT89LP2052.

romel_emperado · « **Reply #10 on:** May 26, 2011, 06:04:00 PM »

Quote from: 1diyMARKET on May 25, 2011, 08:12:41 PM

Puwede diy (pcb + pards + cables)
Puwede din complete assembled and fully tested

Kasama na iyong windows software

Iyon palang AT89C2051, kailangan mo ang ZIF socket para ma program mo, kasi di pala ISP itong IC na ito. Ang ISP version pala ay yong AT89S2051 o kaya AT89LP2052.

yup mas madali e program ang AT89S2051.. may DIY programmer din ako nyan pero di ko pa nagagawa..

Philippine Electronics Forum · « **Reply #10 on:** May 26, 2011, 06:04:00 PM »

Philippine Electronics Forum