Author Topic: saan po bah mka bili nang atmel programmer (Read 742 times)

angoloece · « **on:** October 12, 2010, 03:54:20 PM »

help.. saan po bah mka bili nang atmel programmer.. n kahit anong atmel MCU pwude m programm....tnks

Philippine Electronics Forum · « **on:** October 12, 2010, 03:54:20 PM »

Pro-Engineer · « **Reply #1 on:** October 12, 2010, 05:39:41 PM »

try mo sa alexan or rsphils or farnell.

Philippine Electronics Forum · « **Reply #1 on:** October 12, 2010, 05:39:41 PM »

OPTIMUS PRIME · « **Reply #2 on:** October 12, 2010, 06:46:34 PM »

very expensive hmmm

Philippine Electronics Forum · « **Reply #2 on:** October 12, 2010, 06:46:34 PM »

tiktak · « **Reply #3 on:** October 12, 2010, 06:55:14 PM »

para sa 20 pin 8051 (AT89C2051) meron ito sa alexan, kung sa AVR naman may mga DIY na nagkalat sa net using pony prog

Philippine Electronics Forum · « **Reply #3 on:** October 12, 2010, 06:55:14 PM »

geoben · « **Reply #4 on:** October 12, 2010, 07:05:17 PM »

Sa Nipa Hut bro http://nipahut.com.ph/

Philippine Electronics Forum · « **Reply #4 on:** October 12, 2010, 07:05:17 PM »

Mayor Johnaray · « **Reply #5 on:** October 12, 2010, 07:28:01 PM »

PM mo po si Sir Dandy

Dandy · « **Reply #6 on:** October 12, 2010, 08:16:15 PM »

Quote from: angoloece on October 12, 2010, 03:54:20 PM

help.. saan po bah mka bili nang atmel programmer.. n kahit anong atmel MCU pwude m programm....tnks

medyo mahirap hanapin itong programmer na ito - malamang Universal Programmer ang kailangan mo gaya ng Hi-lo programmer na upgradable ang firmware para i-support ang all-present at future MCU, kasi ang requirement mo, kahit anong Atmel MCU puwede i-program, ibig sabihin supporado lahat ang Atmel MCU. I can help to buy this programmer.

Kung sakali na kailangan mo ang programmer ng Atmel 8051 MCU (8 bit) gaya ng AT89C51/52, AT89S51/52/53, AT89S8252/53, AT89S2051, AT89S4051, AT89LP4052.... it support ISP Programming for Atmel ISP 8051 MCU, watch the demo video :

http://s328.photobucket.com/player.swf?file=http://vid328.photobucket.com/albums/l336/myphotoloader/Programmer/HSAT89Flash8051MCUProgrammer.flv&fs=1&os=1&ap=1

Download the User Manual (Filipino Version) : http://www.1diycentre.com/DIY_01_AT89%20Flash%20MCU%20Programmer%20R1.3.pdf

You might also interested with our own designed 8051 Trainers : http://www.1diycentre.com/mcu_files/Page1447.htm

leoren_tm · « **Reply #7 on:** October 22, 2010, 09:35:31 PM »

may all 100 sa alexan 70k ata XD

1diyMARKET · « **Reply #8 on:** October 22, 2010, 09:54:32 PM »

Quote from: leoren_tm on October 22, 2010, 09:35:31 PM

may all 100 sa alexan 70k ata XD

hehehehe, 70K php.

leoren_tm · « **Reply #9 on:** October 22, 2010, 09:59:29 PM »

yuppp yuppp....peru halos lahat, from EEPROM to 100 companies

booble · « **Reply #10 on:** October 25, 2010, 02:52:04 PM »

DIY usbasp pero kailangan mo ng ponyprog at avrisp or some other dongle for the initial atmega8.

RiDdLeR??? · « **Reply #11 on:** December 27, 2010, 12:29:08 PM »

Yung latest na s51 ng 1diycentre, supposed to be kaya mag program ang avrs. It is detected as USBASP and uses USBASP firmware kaya lang so far tinatry ko iread ang atmega8515, hindi niya mabasa using progisp. Malamang settings lang ang problema, wala kasi instructions eh.

sh@rp · « **Reply #12 on:** June 08, 2011, 07:51:19 AM »

89c51 mga master may reliable programmer ba dito?

Philippine Electronics Forum · « **Reply #12 on:** June 08, 2011, 07:51:19 AM »

Philippine Electronics Forum