Author Topic: Serial Port (PC) and Serial Cable loopback (Read 1689 times)

Winterburn · « **on:** April 24, 2008, 08:01:30 PM »

Gusto ko sana itest kung may continuity yung bagong bili kong serial cable para sa PIC programmer ko, mahirap na kasi, baka while testing magkaloko-loko dahil sa noise. Can I simply tie Tx and Rx ng kabilang dulo ng serial cable ko then hyperterminal para macheck kung ok siya? Hindi ba dangerous yun?

Philippine Electronics Forum · « **on:** April 24, 2008, 08:01:30 PM »

0b00000111 · « **Reply #1 on:** April 24, 2008, 08:15:26 PM »

Quote from: Winterburn on April 24, 2008, 08:01:30 PM

Gusto ko sana itest kung may continuity yung bagong bili kong serial cable para sa PIC programmer ko, mahirap na kasi, baka while testing magkaloko-loko dahil sa noise. Can I simply tie Tx and Rx ng kabilang dulo ng serial cable ko then hyperterminal para macheck kung ok siya? Hindi ba dangerous yun?

ok lang yan...

Philippine Electronics Forum · « **Reply #1 on:** April 24, 2008, 08:15:26 PM »

rdpzycho · « **Reply #2 on:** April 24, 2008, 08:28:05 PM »

I normally do that using a flat screwdriver.

Philippine Electronics Forum · « **Reply #2 on:** April 24, 2008, 08:28:05 PM »

Winterburn · « **Reply #3 on:** April 24, 2008, 08:44:38 PM »

Onga noh, 2 and 3 nga lang pala, magkatabi lang. Ang hirap dito sa bahay, walang kagamit-gamit. Hahaha!

Philippine Electronics Forum · « **Reply #3 on:** April 24, 2008, 08:44:38 PM »

paranz · « **Reply #4 on:** April 24, 2008, 09:49:45 PM »

time to invest!

Philippine Electronics Forum · « **Reply #4 on:** April 24, 2008, 09:49:45 PM »

glutnix_neo · « **Reply #5 on:** April 25, 2008, 08:14:25 AM »

actually natry ko rin yan nung monday lang, wala namang problema,and there should be no problem naman talaga,

maldihtah13 · « **Reply #6 on:** May 21, 2008, 10:57:16 PM »

Ok un tested kung gusto mo nman dalawa serial port tpos icross mo ung 2 and 3.

Prang mas mahirap pa ata un. he he he

Philippine Electronics Forum · « **Reply #6 on:** May 21, 2008, 10:57:16 PM »

Philippine Electronics Forum