Author Topic: Micropone Problem (Read 444 times)

Warstg_20 · « **on:** October 31, 2010, 05:23:08 PM »

mga master tulong naman po,..

Bumuli po kZ m kanina nga head set with microphone, gumagana ang head set pero mic ayaw,. try namin to sa binilihan gumagana naman,..

ang mga kinlikot ko d2 kanina ay installed ako bago driver ng sound card, tapos napansin na dpo clikable young vulume ng mic sa properties..

ito po ang mic properties,..
http://warlitobaya.blogspot.com/2010/10/problem-on-microphone.html

thanks...

Philippine Electronics Forum · « **on:** October 31, 2010, 05:23:08 PM »

Warstg_20 · « **Reply #1 on:** October 31, 2010, 07:00:38 PM »

Sinsya na mga master dko po alam gawin thumbnails ang pic..

Philippine Electronics Forum · « **Reply #1 on:** October 31, 2010, 07:00:38 PM »

insomartin · « **Reply #2 on:** October 31, 2010, 07:11:51 PM »

minsan tamad yung technician na ilagay yung headers sa FRONT PANEL

kung may mic in sa likuran dun mo i try... or vise versa

Philippine Electronics Forum · « **Reply #2 on:** October 31, 2010, 07:11:51 PM »

Warstg_20 · « **Reply #3 on:** October 31, 2010, 07:29:52 PM »

Quote from: Boss Don on October 31, 2010, 07:11:51 PM

minsan tamad yung technician na ilagay yung headers sa FRONT PANEL

kung may mic in sa likuran dun mo i try... or vise versa

Sir na try ko na po. .

Philippine Electronics Forum · « **Reply #3 on:** October 31, 2010, 07:29:52 PM »

??? · « **Reply #4 on:** October 31, 2010, 07:59:43 PM »

Check mo master sa Control panel then sound and audio devices.Under volume tab tick advance on device volume(xp). Expand the synthesizer box uncheck lahat ng mute then full up all volume.

Check your mic switch if it have.Then test or use ym call feature to calibrate or test the said mic. Or some software you know.

Philippine Electronics Forum · « **Reply #4 on:** October 31, 2010, 07:59:43 PM »

~Q~ · « **Reply #5 on:** November 03, 2010, 02:53:39 AM »

if hindi clickable mga options sa sound option ng control panel mo or dyan sa audio properties mo basically if nothing is clickable i suggest u re-install ur drivers but if still doesnt work... ako usually reformat katapat ko lang nyan... ahahahaha para di na ako mahirapan ^_^

Philippine Electronics Forum · « **Reply #5 on:** November 03, 2010, 02:53:39 AM »

Philippine Electronics Forum