E-Gizmo's Ethernet TCP/IP to Serial Shield

[0b00000111]

It's my first day using this and madali siya gamitin.



Here is my current setup for testing... Encircled in green is the wire to short the serial lines (RX and TX) for loopback testing.

PDF:
Datasheet
http://www.szatc.com/english/Upload/200946165558902.pdf

User's Manual
http://www.szatc.com/english/Upload/2009414133941225.pdf

Schematic
http://www.szatc.com/english/Upload/2009181807794.pdf


Here is the procedure from setting the static IP up to hyperterminal loopback testing. (btw, makikita nyo rin na nagbiblink yung green light ng module while typing sa hyperterminal)

http://www.swfcabin.com/open/1290180297


default username and password: U: admin   P: system


Tomorrow, I'll start doing sample code using C#.

[0b00000111]

I successfully tested it using C# (sockets)



Here is the complete source code (Compiled and tested in Microsoft Visual C# 2010):
http://codepad.org/eKoc8evj

- although the code is working, it still needs to implement other exception error that may occur (especially if somebody will reuse some of the codes in the example)... Di ko na sinimulate lahat ng exception error as this is just a connectivity test between the  TCP/IP shield and C#


edit: may typo error pa pala: "It this is displayed, the test is successful! Congrats!"   dapat  "If this is displayed, the test is successful! Congrats!" hehehehe...

[Kaizer03]

nice.. makagawa ng similar demonstration using enc28J60 pagkatapos ng board ko =) or using my existing na lang =)

[picuser]

tama. share your ENC28J60 masterpiece na. hehe

[Kaizer03]

tama. share your ENC28J60 masterpiece na. hehe

still havent finished my MPLAB C18's version eh.. hehe pero sshare ko dito ang demonstration including the web interfacing=)

[toasted siopao]

Ito ba yung pwede mo lagyan ng html page sa loob?

Medyo wala ako alam sa ganito hehehe... Yung zilog ko na ganito nalalagyan ng html page sa loob tapos pindot pindot na lang. Problema di ako marunong gumamit.

[Kaizer03]

Ito ba yung pwede mo lagyan ng html page sa loob?

Medyo wala ako alam sa ganito hehehe... Yung zilog ko na ganito nalalagyan ng html page sa loob tapos pindot pindot na lang. Problema di ako marunong gumamit.

yup sir, most probably pede itong Ethernet Shield ng Gizmo..

with microchip's ENC, ang dali lang maggawa ng webpage at sakyan ng mga variables..

[0b00000111]

nice.. makagawa ng similar demonstration using enc28J60 pagkatapos ng board ko =) or using my existing na lang =)

I want to create an ENC28J60 din para maka dwelve ako deeper at ma experience ko gamitin yung TCP/IP stack ng microchip (just for learning purpose)... Malaking plus dito sa shield is ready-made solution na siya (almost zero development cost) at ang halos icoconfigure na lang is yung bilis UART settings via web config...

on-topic:

parang kulang yung nasa user's manual ng ATC-1000m, di ko mahanap kung paano yung procedure para macontrol yung Command Channel (for the 7 GPIO's)....   (search mode)

[0b00000111]

buti tinanong sa akin ni marce ito sa fb hehehe.. I experimented a bit heheheheh...

E-Gizmo Shield Data Acquisition via Wi-fi

Configuration and testing:
http://www.swfcabin.com/open/1290219342

My setup:
Desktop PC   <-----> Wi-fi  <----->  Encore Wireless  Router <----->   E-Gizmo TCP/IP Shield

[marcelino]

^hahahah! impakta ka din!

gusto ko din kasi gumawa ng similar setup... parang madami ang application ng ganyan di ba?
generally sa data acquisition na nagrerequire ng multiple nodes (like HVAC). kasama na ang decisions support (sa PC na).

or kahit sa home automation nalang-- pwedeng pwede!.

nice one sis! ganda mo!

[Kaizer03]

^hahahah! impakta ka din!

gusto ko din kasi gumawa ng similar setup... parang madami ang application ng ganyan di ba?
generally sa data acquisition na nagrerequire ng multiple nodes (like HVAC). kasama na ang decisions support (sa PC na).

or kahit sa home automation nalang-- pwedeng pwede!.

nice one sis! ganda mo!

pede din yan over internet =)

home automation din yung naiisip ko nung time na nakahawak ako ng ganitong project hehe..

['yus]

wow galing..
pwede rin ba dyan yung online sms server?
this->kit + gsm.module = free txt server ?

[0b00000111]

pwede rin ba dyan yung online sms server?
this->kit + gsm.module = free txt server ?

yup possible yan sis

[0b00000111]

Here is the code for integrating the TCP-IP Shield and Gizduino

Code: [Select]

// By 7
// Version 00.08.00
#include <SoftwareSerial.h>

#define rxPin 0
#define txPin 1

SoftwareSerial mySerial =  SoftwareSerial(rxPin, txPin);
byte pinState = 0;

void setup() {
  pinMode(rxPin, INPUT);
  pinMode(txPin, OUTPUT);
  pinMode(ledPin, OUTPUT);
  mySerial.begin(9600);
  mySerial.print("Hello! This is Gizduino!");
}

void loop() {
  char c = mySerial.read();
  mySerial.print((char)(c+1));
}

Software serial lang ginamit ko... check ko pa mamaya datasheet ng Atmega168 kung ilan ang HW serial port nya...

Using hyperterminal: 192.168.2.1 port 23
Pag nagtype: nagtype sa hyperterminal, marereceive ng gizduino then ibabalik nya ng +1... for example: Pag nagpadala ng "s", ibabalik ng "t"

[glutnix_neo]

subscibing, gusto ko rin matuto gumawa ng webserver at magcontrol ng devices via internet

[0b00000111]

Eto pala yung sample python code

Code: [Select]

'''
By: 7
Sample Loopback Program for TCP/IP to Serial Shield
'''
import socket,time

HOST = '192.168.2.1'
PORT = 23           
s = socket.socket(socket.AF_INET, socket.SOCK_STREAM)
s.connect((HOST, PORT))
try:
    s.send('Hello, world')
    time.sleep(.5)
    data = s.recv(1024)
finally:
    s.close()

print 'Received:', repr(data)


[akhen]

galing talaga ni mother queen.... ganda point for you...

[maldihtah13]

Gusto ko rin nyan para matuto me ng TCIP comm.

[tiktak]

subscribing mode

[tiktak]

Ito ba yung pwede mo lagyan ng html page sa loob?

Medyo wala ako alam sa ganito hehehe... Yung zilog ko na ganito nalalagyan ng html page sa loob tapos pindot pindot na lang. Problema di ako marunong gumamit.

sis ito ba yung zilog acclaim?