caramoan tour package

caramoan tour package

« previous next »
Pages: 1 2 [3] 4   Go Down

Author Topic: E-Gizmo's Ethernet TCP/IP to Serial Shield  (Read 3729 times)

Offline subzer0

  • Diesel Generator
  • *
  • Posts: 1222
  • Pogi/Ganda Points: 38
  • Garbage In Garbage Out.
Re: E-Gizmo's Ethernet TCP/IP to Serial Shield
« Reply #40 on: December 08, 2010, 12:12:41 PM »
galeng ni manay!!!
Logged
Signing Off...

Philippine Electronics Forum

Re: E-Gizmo's Ethernet TCP/IP to Serial Shield
« Reply #40 on: December 08, 2010, 12:12:41 PM »

Offline glutnix_neo

  • Technical People
  • Nuclear Reactor
  • *****
  • Posts: 4162
  • Pogi/Ganda Points: 166
  • Gender: Female
  • A journey to a thousand lines begins w/ LED Blink
    • Underground Workbench
Re: E-Gizmo's Ethernet TCP/IP to Serial Shield
« Reply #41 on: December 19, 2010, 10:49:31 PM »
Logged
If we hear,we forget;if we see, we remember;if we do,we understand.
Let's support the use of free and open source softwares...
http://UndergroundWorkbench.wordpress.com

Philippine Electronics Forum

Re: E-Gizmo's Ethernet TCP/IP to Serial Shield
« Reply #41 on: December 19, 2010, 10:49:31 PM »

Offline 0b00000111

  • Technical People
  • Solar Power Satellite
  • *****
  • Posts: 6129
  • Pogi/Ganda Points: 398
  • There is no delight in owning anything unshared.
Re: E-Gizmo's Ethernet TCP/IP to Serial Shield
« Reply #42 on: December 19, 2010, 10:56:47 PM »
wala akong router na ganyan :(
Logged
E-Gizmo Mechatronix Central: www.e-gizmo.com

Tel #: (63)(2) 536-3378
Globe +63915-973-7691
Smart +63921-779-0748

Location Map

YM: julie.egizmo  aka Born2BeWired  ;D

Philippine Electronics Forum

Re: E-Gizmo's Ethernet TCP/IP to Serial Shield
« Reply #42 on: December 19, 2010, 10:56:47 PM »

Offline glutnix_neo

  • Technical People
  • Nuclear Reactor
  • *****
  • Posts: 4162
  • Pogi/Ganda Points: 166
  • Gender: Female
  • A journey to a thousand lines begins w/ LED Blink
    • Underground Workbench
Re: E-Gizmo's Ethernet TCP/IP to Serial Shield
« Reply #43 on: December 20, 2010, 07:17:01 AM »
pwede yata sa ibang router yan firmware nyan...
Logged
If we hear,we forget;if we see, we remember;if we do,we understand.
Let's support the use of free and open source softwares...
http://UndergroundWorkbench.wordpress.com

Philippine Electronics Forum

Re: E-Gizmo's Ethernet TCP/IP to Serial Shield
« Reply #43 on: December 20, 2010, 07:17:01 AM »

Offline PlCUSER

  • Diesel Generator
  • *
  • Posts: 1910
  • Pogi/Ganda Points: 153
Re: E-Gizmo's Ethernet TCP/IP to Serial Shield
« Reply #44 on: December 20, 2010, 07:51:36 AM »
Logged

Philippine Electronics Forum

Re: E-Gizmo's Ethernet TCP/IP to Serial Shield
« Reply #44 on: December 20, 2010, 07:51:36 AM »

Offline marcelino

  • Technical People
  • Solar Power Satellite
  • *****
  • Posts: 6016
  • Pogi/Ganda Points: 258
  • ...keep moving forward! - Robinson's
Re: E-Gizmo's Ethernet TCP/IP to Serial Shield
« Reply #45 on: December 20, 2010, 09:53:01 AM »
may usb connection yung router?
Logged
"Don't take life seriously. After all, no one has ever come out of it alive. -Bugs Bunny"

Offline tiktak

  • Gas Turbine
  • **
  • Posts: 2859
  • Pogi/Ganda Points: 203
  • Gender: Male
    • Tiktakx's Blog
Re: E-Gizmo's Ethernet TCP/IP to Serial Shield
« Reply #46 on: December 20, 2010, 09:56:08 AM »
baka pede dyan sis yung tomato na router sa CDRKING
Logged
8051 stuff

Offline subzer0

  • Diesel Generator
  • *
  • Posts: 1222
  • Pogi/Ganda Points: 38
  • Garbage In Garbage Out.
Re: E-Gizmo's Ethernet TCP/IP to Serial Shield
« Reply #47 on: December 20, 2010, 12:56:01 PM »
Quote from: tiktak on December 20, 2010, 09:56:08 AM
baka pede dyan sis yung tomato na router sa CDRKING
sana 1580 lang yun eh super mura
Logged
Signing Off...

Offline glutnix_neo

  • Technical People
  • Nuclear Reactor
  • *****
  • Posts: 4162
  • Pogi/Ganda Points: 166
  • Gender: Female
  • A journey to a thousand lines begins w/ LED Blink
    • Underground Workbench
Re: E-Gizmo's Ethernet TCP/IP to Serial Shield
« Reply #48 on: December 20, 2010, 01:15:17 PM »
dapat yata eh may usb yung router para mainstallan ng USB serial driver at check nyo rin kung supported nung DD-WRT FW yung router.
Logged
If we hear,we forget;if we see, we remember;if we do,we understand.
Let's support the use of free and open source softwares...
http://UndergroundWorkbench.wordpress.com

Offline Macgyver

  • Diesel Generator
  • *
  • Posts: 1440
  • Pogi/Ganda Points: 70
    • MakerDude
Re: E-Gizmo's Ethernet TCP/IP to Serial Shield
« Reply #49 on: December 20, 2010, 01:26:41 PM »
ayos yan ah.
Logged
Become a Virtual Worker |  MakerDude.com Electronics Shop is now OPEN!

Offline subzer0

  • Diesel Generator
  • *
  • Posts: 1222
  • Pogi/Ganda Points: 38
  • Garbage In Garbage Out.
Re: E-Gizmo's Ethernet TCP/IP to Serial Shield
« Reply #50 on: December 20, 2010, 01:57:53 PM »
Quote from: glutnix_neo on December 20, 2010, 01:15:17 PM
dapat yata eh may usb yung router para mainstallan ng USB serial driver at check nyo rin kung supported nung DD-WRT FW yung router.
broadcom chip ata yun sis baka meron naman
Logged
Signing Off...

Offline rdpzycho

  • Technical People
  • Solar Power Satellite
  • *****
  • Posts: 10728
  • Pogi/Ganda Points: 632
  • Gender: Male
  • Respect Begets Respect
    • rdpzycho
Re: E-Gizmo's Ethernet TCP/IP to Serial Shield
« Reply #51 on: December 20, 2010, 02:13:23 PM »
^ yup meron. at pwede ring mag-install ng drivers the same way doon sa link.
Logged
‎"Divide each difficulty into as many parts as is feasible and necessary to resolve it."
- Rene Descartes

"For every difficult problem there is always a simple answer and most of them are wrong."
- Clayton Paul

Offline LTSGü

  • Size C Battery
  • *****
  • Posts: 193
  • Pogi/Ganda Points: 10
  • Gender: Male
  • ~two things in life: RIGHT and WRONG~
Re: E-Gizmo's Ethernet TCP/IP to Serial Shield
« Reply #52 on: April 12, 2011, 06:46:56 PM »
sir ask lang po kung normal lang po ba yung heat sa likod ng rt9163 regulator?  parang sobra po kasi yung init eh.. medyo nakakapaso na rin... please reply asap.. TIA ;)
Logged
Extremely Cute Engineer

~Craving for Knowledge~

Offline LTSGü

  • Size C Battery
  • *****
  • Posts: 193
  • Pogi/Ganda Points: 10
  • Gender: Male
  • ~two things in life: RIGHT and WRONG~
Re: E-Gizmo's Ethernet TCP/IP to Serial Shield
« Reply #53 on: April 18, 2011, 10:09:22 PM »
tinry ko na yung loopback sa hyperterminal.. okay naman siya... gumawa na rin ako ng program sa vb6 para sa simple loopback din.. and gumana din narerecive ko din yung mga sinisend kong data.. ang problema po ngayon eh kapag direnerekta ko sa internet yung loopback test.. walang bumabalik..

tinry ko na baguhin yung ip... tinest ko sa sa VB (lan connection), okay siya.. pagdatin sa internet di ko talaga makuha.. ano po ba dapat kong gawin dito? ilang gabi ko na rin to kinakapa.. waley talaga.. hehe bobo ko eh..  ;D
Logged
Extremely Cute Engineer

~Craving for Knowledge~

Offline LTSGü

  • Size C Battery
  • *****
  • Posts: 193
  • Pogi/Ganda Points: 10
  • Gender: Male
  • ~two things in life: RIGHT and WRONG~
Re: E-Gizmo's Ethernet TCP/IP to Serial Shield
« Reply #54 on: April 19, 2011, 01:18:00 PM »
up!

wala prin nangyayari sakin matino.. XD

yung system IP addres yung ginagamit ko sa LAN loopback...
magagamit ko po ba siya kapag direkta ko nilagyan ng connection ng internet?
eh yung remote IP address?

tapos natry nyo na po ba gamitin yun IO pins nung module? kasi nakalagay po dun sa manual ng e-gizmo.. hindi daw po siya included sa firmware ng module..
nagsearch na ko sa net ng other examples.. and waley... puro datasheets and manual lang yung lumalabas XD

meorn akong di alam. kaya di ko magawa kaso hindi ko din alam kung ano yung di ko alam XD
Logged
Extremely Cute Engineer

~Craving for Knowledge~

Offline Kaizer03

  • Nuclear Reactor
  • ****
  • Posts: 4847
  • Pogi/Ganda Points: 225
  • C#<-->Android<-->Java
    • PhilRobotics
Re: E-Gizmo's Ethernet TCP/IP to Serial Shield
« Reply #55 on: April 19, 2011, 03:03:05 PM »
Quote from: LTSGü on April 18, 2011, 10:09:22 PM
tinry ko na yung loopback sa hyperterminal.. okay naman siya... gumawa na rin ako ng program sa vb6 para sa simple loopback din.. and gumana din narerecive ko din yung mga sinisend kong data.. ang problema po ngayon eh kapag direnerekta ko sa internet yung loopback test.. walang bumabalik..

tinry ko na baguhin yung ip... tinest ko sa sa VB (lan connection), okay siya.. pagdatin sa internet di ko talaga makuha.. ano po ba dapat kong gawin dito? ilang gabi ko na rin to kinakapa.. waley talaga.. hehe bobo ko eh..  ;D

internet? what do you mean? nagsend ka through your ISP's IP? if yes.. nagportforward ka ba? malamang hindi, thats why... iconfigure mo yan sa router mo, i suggest to use other port instead of using the default port 80 sa router side..

say... your ip is... 222.164.77.109.. ang external port mo eh 9090
your Ethernet Shield IP is 192.168.1.2 port 80

send a packet through your vb and your target is 222.164.77.109 and port is 9090,

internally your router will forward any incoming data from port 9090 to 192.168.1.2 port 80

may UI ba yang Ethernet Shield?


Logged
Lend a hand for those who are in need!=)

Stop Hijacking!=) More Technical Posts!=)
 ;)

Kaizer Killer EX Pre-Alpha

Offline insomartin

  • Moderator
  • Nuclear Reactor
  • *****
  • Posts: 4827
  • Pogi/Ganda Points: 320
  • Gender: Male
  • Nalulunod lang...
Re: E-Gizmo's Ethernet TCP/IP to Serial Shield
« Reply #56 on: April 19, 2011, 03:19:55 PM »
^ expert!
Logged

Offline LTSGü

  • Size C Battery
  • *****
  • Posts: 193
  • Pogi/Ganda Points: 10
  • Gender: Male
  • ~two things in life: RIGHT and WRONG~
Re: E-Gizmo's Ethernet TCP/IP to Serial Shield
« Reply #57 on: April 19, 2011, 03:30:40 PM »
kuya gigz yung mga configurations niya ineedit sa webserver na nakainstall sa mismong module..
eto yung mga pwedeng pakelaman..



Uploaded with ImageShack.us

iupload ko na lang yung nasa webserver ng module.. para makatulong XD

tsaka yung port na default is port 23 tapos telnet server yung configuration..
ang akala ko kasi yung problem has something to do with the ip addressing..
SALAMAT!!  :)try ko yang port forwarding...

@boss martin:
oo nga eh mamaw yan si tita gigz  ;D
Logged
Extremely Cute Engineer

~Craving for Knowledge~

Offline Kaizer03

  • Nuclear Reactor
  • ****
  • Posts: 4847
  • Pogi/Ganda Points: 225
  • C#<-->Android<-->Java
    • PhilRobotics
Re: E-Gizmo's Ethernet TCP/IP to Serial Shield
« Reply #58 on: April 19, 2011, 03:38:03 PM »
Quote from: Boss Don Martin on April 19, 2011, 03:19:55 PM
^ expert!

nyak, syempre joke lang yan.. wild guess lang :p

@LTSG, di ko makita yung texts sa pic,, ang liit hehe

port 23 ba gamit mo pag nagloopback test ka?

wala akong alam jan, eh try ko ulet manghula later :D
Logged
Lend a hand for those who are in need!=)

Stop Hijacking!=) More Technical Posts!=)
 ;)

Kaizer Killer EX Pre-Alpha

Offline LTSGü

  • Size C Battery
  • *****
  • Posts: 193
  • Pogi/Ganda Points: 10
  • Gender: Male
  • ~two things in life: RIGHT and WRONG~
Re: E-Gizmo's Ethernet TCP/IP to Serial Shield
« Reply #59 on: April 19, 2011, 03:40:13 PM »
oo nga eh..sige iupload ng isa-isa para mas malaki..  ;)
Logged
Extremely Cute Engineer

~Craving for Knowledge~

Philippine Electronics Forum

Re: E-Gizmo's Ethernet TCP/IP to Serial Shield
« Reply #59 on: April 19, 2011, 03:40:13 PM »
Pages: 1 2 [3] 4   Go Up
« previous next »
 

Privacy Policy

Contact Us: elabph@yahoo.com