Author Topic: Mechatronics, ECE or IT? (Read 462 times)

Ikasamoko · « **on:** February 01, 2011, 06:01:09 PM »

Anu ma suggest nyo na course sa college?

Mechatronics, ECE or IT??

yung panganay ko mag college na...pumasa na sa TUP....ma top ang entrance exam he was offered ng Mechatronics pero gusto nya sana is IT..which is technician based lang...

Anu ma suggest nyo mga sis?

Philippine Electronics Forum · « **on:** February 01, 2011, 06:01:09 PM »

zer0w1ng · « **Reply #1 on:** February 01, 2011, 06:09:40 PM »

Either of the three will be technical.
However, "IT" does not touch on hardware, this is just purely business app dev't and computer science stuff.

IMHO, a good programmer should have at least a grasp on computer hardware and should know what is happening inside a PC. How does the buses and processor works internally.

However, this is very dependent on the students. If he has no inclination or passion for his study (just doing for compliance sake) then the learning will be that useful or may not learn at all.

Philippine Electronics Forum · « **Reply #1 on:** February 01, 2011, 06:09:40 PM »

Ikasamoko · « **Reply #2 on:** February 01, 2011, 06:19:24 PM »

yung tinitingnan ko sis yung after nya makatapos...

what field mas mabilis nakapag trabaho at the same time rewarding na work...

for me mas ok sa mecha...aside sa learning mag ienjoy pa sya..assuming hilig nya mag kulikot...

Philippine Electronics Forum · « **Reply #2 on:** February 01, 2011, 06:19:24 PM »

rdpzycho · « **Reply #3 on:** February 01, 2011, 08:49:28 PM »

pagdating sa trabaho, mas maraming maa-apply-an sa IT ngayon, at sila rin 'yung may pinakamabilis na taas ng sahod.

next sa tatlo 'yung ECE since marami ring mapapasukang iba-ibang fields.

'yung Mechatronics, nakaka-enjoy talaga siya, pero on actual demand sa trabaho, madalas ECE or ME 'yung kinukuha, most preferably ME graduate na marunong ng Electronics dahil sila 'yung rare breed compared sa ECE graduate na marunong ng Mechanical.

Philippine Electronics Forum · « **Reply #3 on:** February 01, 2011, 08:49:28 PM »

Macgyver · « **Reply #4 on:** February 01, 2011, 11:09:18 PM »

para guluhin lalo ang isip mo.. heto... I took BS. Computer Science, there are a couple of hardware/software/business side subjects. The bad part, about 90% of what I studied in college is obsolete. Every new skill I need to learn by myself. Panibagong study uli as the technology changes. The good part, the fundamentals of IT, programming, system analysis makes it easier for me to learn new stuff.

In terms of work, eto ang masasabi ko, all things that a typical ECE or IT person does, in most cases (not all ha) are supporting functions of the main business. For example, the booming call center industry. The core business is outsourcing services but the infrastructure that supports it are based on technologies like VOIP, networks, where ECE or IT people handle.

The good thing about IT is maraming pwedeng pasukan na industries. Actually any industry, any mid sized company, may IT department. And since namention mo na IT ang hilig, eh di yun na. Ang importante lang is maging hands on sya sa lahat ng projects, wag yung parang mga nakikita natin sa forum na "patulong may assignment ako, pahingi ng schematic at source code.."

Philippine Electronics Forum · « **Reply #4 on:** February 01, 2011, 11:09:18 PM »

Ikasamoko · « **Reply #5 on:** February 02, 2011, 11:19:04 AM »

^^^ Mas lalong gumulo..

ganyan din pananaw ko as of now...pero in 5 yrs term...di natin masasabi...but since na 3 yrs technician based yung IT nila...pwede naman siguro na yun na muna unahin nya then ECE or mecha to follow...

Salamat sa mga suggestion nyo sis...tig iisang banana q kau..

Philippine Electronics Forum · « **Reply #5 on:** February 02, 2011, 11:19:04 AM »

Philippine Electronics Forum