Author Topic: microcontroller based flash drive data transfer.. (Read 1173 times)

LTSGü · « **on:** February 28, 2011, 09:23:54 PM »

madugo po ba if ever gagawa kami ng stand alone system na pwedeng mag move,delete, copy, paste etc. ng mga files sa flash drive??

uhm parang ganito:

flash_drive_1 ----->system <-------flash_drive_2

system features:
-copy
-paste
-move (redundant

)
-delete
-others (any suggestions?)

microcontroller based po yung system... hmm $:-\$ $:-\$ $:-\$ $:-\$

Philippine Electronics Forum · « **on:** February 28, 2011, 09:23:54 PM »

Tal Rasha · « **Reply #1 on:** April 14, 2011, 10:50:29 PM »

hi... just curious.. nagawa mo ba to?

Philippine Electronics Forum · « **Reply #1 on:** April 14, 2011, 10:50:29 PM »

insomartin · « **Reply #2 on:** April 15, 2011, 05:09:46 AM »

Quote from: LTSGü on February 28, 2011, 09:23:54 PM

madugo po ba if ever gagawa kami ng stand alone system na pwedeng mag move,delete, copy, paste etc. ng mga files sa flash drive??

uhm parang ganito:

flash_drive_1 ----->system <-------flash_drive_2

system features:
-copy
-paste
-move (redundant )
-delete
-others (any suggestions?)

microcontroller based po yung system... hmm $:-\$ $:-\$ $:-\$ $:-\$

yeah... bakit nga ba walang pumansin nito?

Philippine Electronics Forum · « **Reply #2 on:** April 15, 2011, 05:09:46 AM »

Tal Rasha · « **Reply #3 on:** April 15, 2011, 10:31:33 AM »

baka walang makasagot?

Philippine Electronics Forum · « **Reply #3 on:** April 15, 2011, 10:31:33 AM »

insomartin · « **Reply #4 on:** April 15, 2011, 01:11:43 PM »

di lang siguro napansin

Philippine Electronics Forum · « **Reply #4 on:** April 15, 2011, 01:11:43 PM »

Tal Rasha · « **Reply #5 on:** April 15, 2011, 01:48:17 PM »

Madugo nga ba?

Born2BeWired · « **Reply #6 on:** April 15, 2011, 02:16:59 PM »

If you are using just a microcontroller to do this job, it will be insanely difficult. But with support of USB Host Chips, such as FDTI Vinculum V1NC or V2NC, it should be just as easy as a walk in a park.

LTSGü · « **Reply #7 on:** April 15, 2011, 02:30:18 PM »

ibang project yung naapproved samin eh...
pero eto yung papers ng ateneo nung gumawa sila nito..

flash to flash

Tal Rasha · « **Reply #8 on:** April 15, 2011, 06:29:20 PM »

Quote

If you are using just a microcontroller to do this job, it will be insanely difficult. But with support of USB Host Chips, such as FDTI Vinculum V1NC or V2NC, it should be just as easy as a walk in a park.

madugo nga ata. ^^

How much is a USB Host chip?

hunterxhunter · « **Reply #9 on:** November 24, 2011, 02:00:32 PM »

sana po may makasagot kahit kung paano iset up ito,magandang idea din ito, kahit mga gagamitin at type ng mcu saka schematic..salamat po ^^

SpongeBob · « **Reply #10 on:** November 24, 2011, 07:53:43 PM »

Madali lang to sa VDIP module ng FTDI.

??? · « **Reply #11 on:** November 24, 2011, 07:57:59 PM »

Ganda nga ng ganito.

insomartin · « **Reply #12 on:** November 24, 2011, 07:58:32 PM »

Quote from: SpongeBob on November 24, 2011, 07:53:43 PM

Madali lang to sa VDIP module ng FTDI.

bakit pa kung may CHEAPER? same ftdi chip. same functions.

maganda pa mounting nang usb, side by side than Vdip na mag kapatong.

http://www.e-gizmo.com/KIT/USBHOST.htm

SpongeBob · « **Reply #13 on:** November 24, 2011, 08:04:19 PM »

^Di lang napadali napamura pa.

Philippine Electronics Forum · « **Reply #13 on:** November 24, 2011, 08:04:19 PM »

Author Topic: microcontroller based flash drive data transfer.. (Read 1173 times)

Philippine Electronics Forum

Philippine Electronics Forum

Philippine Electronics Forum

Philippine Electronics Forum

Philippine Electronics Forum

Philippine Electronics Forum