caramoan tour package

caramoan tour package

« previous next »
Pages: 1 [2]   Go Down

Author Topic: Sharing ENC28J60 Led Blinker Project  (Read 2453 times)

Offline 1diyMARKET

  • Lead Acid Battery
  • *******
  • Posts: 545
  • Pogi/Ganda Points: 4
    • 1 am 1diyTEAM
Re: Sharing ENC28J60 Led Blinker Project
« Reply #20 on: May 08, 2011, 05:24:48 PM »
Quote from: PlCUSER on May 07, 2011, 11:16:36 AM
for a start. what can you do with SO28 PIC18C252, DIP28 PIC18C252, and DIP40 PIC18C452 PICmicros? i am willing to write programs for it. if you can offer something nice that could benefit the elab community, i will pass these chips to you.


This is nice,   for the start.
Guys,  here, free chipset of microchip from our fellow PICuser -  kapag may EB o pa contest baka gusto niyo isama ito.  Hurry up!

Outside elab,  there are school / students / hobbyist who are called less fortunate that due to budget  or financial restriction cannot avail such material,  they might need it.
Logged
Your Support and Purchase of 1diycentre e’store products is a support to our fellow  hobbyist.  Most of the buyers here at e’store are students who do not have yet source of income.  1diyteam offer monthly payment to some items to help our fellow hobbyist.

Philippine Electronics Forum

Re: Sharing ENC28J60 Led Blinker Project
« Reply #20 on: May 08, 2011, 05:24:48 PM »

Offline PlCUSER

  • Diesel Generator
  • *
  • Posts: 1910
  • Pogi/Ganda Points: 153
Re: Sharing ENC28J60 Led Blinker Project
« Reply #21 on: May 08, 2011, 05:36:51 PM »
Logged

Philippine Electronics Forum

Re: Sharing ENC28J60 Led Blinker Project
« Reply #21 on: May 08, 2011, 05:36:51 PM »

Offline drx2k

  • Size D Battery
  • ******
  • Posts: 326
  • Pogi/Ganda Points: 15
  • Gender: Male
    • Drx2k Network
Re: Sharing ENC28J60 Led Blinker Project
« Reply #22 on: May 11, 2011, 10:13:50 PM »
i'll try this soon :)
Logged

Philippine Electronics Forum

Re: Sharing ENC28J60 Led Blinker Project
« Reply #22 on: May 11, 2011, 10:13:50 PM »

Offline PlCUSER

  • Diesel Generator
  • *
  • Posts: 1910
  • Pogi/Ganda Points: 153
Re: Sharing ENC28J60 Led Blinker Project
« Reply #23 on: May 11, 2011, 11:30:51 PM »
go go go! support microchip products! ;D
Logged

Philippine Electronics Forum

Re: Sharing ENC28J60 Led Blinker Project
« Reply #23 on: May 11, 2011, 11:30:51 PM »

Offline drx2k

  • Size D Battery
  • ******
  • Posts: 326
  • Pogi/Ganda Points: 15
  • Gender: Male
    • Drx2k Network
Re: Sharing ENC28J60 Led Blinker Project
« Reply #24 on: May 12, 2011, 06:41:18 PM »
ask ko lng po bakit di ako makaconnect sa ethernet module at PIC kpg naka connect sa router, pero kapag sa PC ok nmn, nagrerespond nmn ung module,

may kinalaman po ba ung utp cable na gamit ko, ang gamit ko kasi ay straight through cable kpg PIC >> PC
Logged

Philippine Electronics Forum

Re: Sharing ENC28J60 Led Blinker Project
« Reply #24 on: May 12, 2011, 06:41:18 PM »

Offline Kaizer03

  • Nuclear Reactor
  • ****
  • Posts: 4847
  • Pogi/Ganda Points: 225
  • C#<-->Android<-->Java
    • PhilRobotics
Re: Sharing ENC28J60 Led Blinker Project
« Reply #25 on: May 12, 2011, 09:34:03 PM »
^

please share your setup more clearly ;) (including the IPs of every devices concerned)
Logged
Lend a hand for those who are in need!=)

Stop Hijacking!=) More Technical Posts!=)
 ;)

Kaizer Killer EX Pre-Alpha

Offline PlCUSER

  • Diesel Generator
  • *
  • Posts: 1910
  • Pogi/Ganda Points: 153
Re: Sharing ENC28J60 Led Blinker Project
« Reply #26 on: May 12, 2011, 09:48:22 PM »
manual set ka ba ng ip mo when you connect to pc? if yes, wat ip setting mo?
wat ip setting mo when you connect naman sa router?
Logged

Offline drx2k

  • Size D Battery
  • ******
  • Posts: 326
  • Pogi/Ganda Points: 15
  • Gender: Male
    • Drx2k Network
Re: Sharing ENC28J60 Led Blinker Project
« Reply #27 on: May 12, 2011, 10:19:30 PM »
eto po ung IP set up ng mga devices

ENC28J60 Module + PIC18F4620 (Manual Configuration

IP = 192.168.2.107
Subnet = 255.255.255.0
Gateway = 192.168.2.1

Linksys WRH54G Wireless Router (DCHP Enabled)

IP = 192.168.2.1
Subnet = 255.255.255.0
Gateway = 192.168.1.1
DNS = 192.168.1.1

PC (Manual Configuration

IP = 192.168.2.106
Subnet = 255.255.255.0
Gateway = 192.168.2.1
DNS = 192.168.2.1
DNS = 192.168.1.1


kapag sa router ko kinonek ung ethernet module, di umiilaw ung activity LED pero kpg sa PC umiilaw nmn
Logged

Offline Macgyver

  • Diesel Generator
  • *
  • Posts: 1440
  • Pogi/Ganda Points: 70
    • MakerDude
Re: Sharing ENC28J60 Led Blinker Project
« Reply #28 on: May 12, 2011, 10:59:43 PM »
dapat ata pag sa PC ka kumonek, naka cross cable, pag sa router straight.   

parang pc to pc, kailangan cross,  then pag pc to router or pc to a switch, straight.
Logged
Become a Virtual Worker |  MakerDude.com Electronics Shop is now OPEN!

Offline maldihtah13

  • Technical People
  • Nuclear Reactor
  • *****
  • Posts: 4670
  • Pogi/Ganda Points: 120
  • Gender: Female
  • Everyday is a learning process so try to learn ;D
    • Blogspot
Re: Sharing ENC28J60 Led Blinker Project
« Reply #29 on: May 13, 2011, 06:36:45 AM »
subscribing
Logged

Offline drx2k

  • Size D Battery
  • ******
  • Posts: 326
  • Pogi/Ganda Points: 15
  • Gender: Male
    • Drx2k Network
Re: Sharing ENC28J60 Led Blinker Project
« Reply #30 on: May 13, 2011, 10:58:12 AM »
ok na, naconnect ko na sa router..
Logged

Offline PlCUSER

  • Diesel Generator
  • *
  • Posts: 1910
  • Pogi/Ganda Points: 153
Re: Sharing ENC28J60 Led Blinker Project
« Reply #31 on: May 13, 2011, 09:57:39 PM »
great! point for you for figuring it out.
Logged

Offline drx2k

  • Size D Battery
  • ******
  • Posts: 326
  • Pogi/Ganda Points: 15
  • Gender: Male
    • Drx2k Network
Re: Sharing ENC28J60 Led Blinker Project
« Reply #32 on: May 14, 2011, 11:41:27 AM »
eto na...na-try ko na rin

http://tinypic.com/r/2pzweg2/7
Logged

Offline PlCUSER

  • Diesel Generator
  • *
  • Posts: 1910
  • Pogi/Ganda Points: 153
Re: Sharing ENC28J60 Led Blinker Project
« Reply #33 on: May 14, 2011, 11:47:28 AM »
ayos! bootloader nag try ka na?
Logged

Offline drx2k

  • Size D Battery
  • ******
  • Posts: 326
  • Pogi/Ganda Points: 15
  • Gender: Male
    • Drx2k Network
Re: Sharing ENC28J60 Led Blinker Project
« Reply #34 on: May 14, 2011, 11:54:01 AM »
di pa po..
Logged

Offline PlCUSER

  • Diesel Generator
  • *
  • Posts: 1910
  • Pogi/Ganda Points: 153
Re: Sharing ENC28J60 Led Blinker Project
« Reply #35 on: May 14, 2011, 12:14:12 PM »
eto gamit kong udp bootloader:
http://www.mikroe.com/forum/viewtopic.php?t=9093

ung hex for 18F2620 jan, pwd mo na iload sa 18F4620, without recompiling. ayos gamitin yan. you can reload firmware over the network.
Logged

Offline drx2k

  • Size D Battery
  • ******
  • Posts: 326
  • Pogi/Ganda Points: 15
  • Gender: Male
    • Drx2k Network
Re: Sharing ENC28J60 Led Blinker Project
« Reply #36 on: May 14, 2011, 12:41:20 PM »
gaano po kalaki ang ginagamit nito sa memory ng PIC?
Logged

Offline PlCUSER

  • Diesel Generator
  • *
  • Posts: 1910
  • Pogi/Ganda Points: 153
Re: Sharing ENC28J60 Led Blinker Project
« Reply #37 on: May 14, 2011, 01:06:50 PM »
nasa 8percent ata for 68Kb na pic
Logged

Offline maldihtah13

  • Technical People
  • Nuclear Reactor
  • *****
  • Posts: 4670
  • Pogi/Ganda Points: 120
  • Gender: Female
  • Everyday is a learning process so try to learn ;D
    • Blogspot
Re: Sharing ENC28J60 Led Blinker Project
« Reply #38 on: May 26, 2011, 06:04:02 AM »
pwede ba ito sa 18f2550?
Logged

Online insomartin

  • Technical People
  • Nuclear Reactor
  • *****
  • Posts: 4828
  • Pogi/Ganda Points: 320
  • Gender: Male
  • Nalulunod lang...
Re: Sharing ENC28J60 Led Blinker Project
« Reply #39 on: May 26, 2011, 07:13:52 AM »
Quote from: maldihtah13 on May 26, 2011, 06:04:02 AM
pwede ba ito sa 18f2550?
opo. no problem with the ENC28J60
Logged

Philippine Electronics Forum

Re: Sharing ENC28J60 Led Blinker Project
« Reply #39 on: May 26, 2011, 07:13:52 AM »
Pages: 1 [2]   Go Up
« previous next »
 

Privacy Policy

Contact Us: elabph@yahoo.com