Author Topic: SANYO ST-21KX2..Standby Only... (Read 335 times)

Afro_tech · « **on:** April 07, 2011, 01:54:37 PM »

mga ka elabs..

saan kaya ang sira nito..

sanyo st-21kx2 standby only...

resolder ko po ang board..wala pa rin.

salamat...

Philippine Electronics Forum · « **on:** April 07, 2011, 01:54:37 PM »

danyenz · « **Reply #1 on:** April 07, 2011, 02:14:40 PM »

tak swith hang mo lahat tapos power on mo remot..

Philippine Electronics Forum · « **Reply #1 on:** April 07, 2011, 02:14:40 PM »

Vaounsi · « **Reply #2 on:** April 07, 2011, 02:16:44 PM »

voltage check muna ng magkaalaman...

Philippine Electronics Forum · « **Reply #2 on:** April 07, 2011, 02:16:44 PM »

taqui · « **Reply #3 on:** April 07, 2011, 05:20:31 PM »

voltage check b+ to hot. 5v sa eeprom at system. 9v sa jungle. try ihang pin8 ng eprom then press power kung mgooscilate

Philippine Electronics Forum · « **Reply #3 on:** April 07, 2011, 05:20:31 PM »

pete · « **Reply #4 on:** April 07, 2011, 05:30:26 PM »

Quote from: Afro_tech on April 07, 2011, 01:54:37 PM

mga ka elabs..

saan kaya ang sira nito..

sanyo st-21kx2 standby only...

resolder ko po ang board..wala pa rin.

salamat...

hehehe sira ang kulay ng sulat mo hehe ang tapang

agree voltage check mona

post nyo narin po ang ginagamit na main parts

reg.
jungle/UOC

mga nagawa

Philippine Electronics Forum · « **Reply #4 on:** April 07, 2011, 05:30:26 PM »

RhUNhA · « **Reply #5 on:** April 07, 2011, 07:08:07 PM »

Quote from: taquinaga on April 07, 2011, 05:20:31 PM

voltage check b+ to hot. 5v sa eeprom at system. 9v sa jungle. try ihang pin8 ng eprom then press power kung mgooscilate

tpos post nyo po major parts n ginamit

Philippine Electronics Forum · « **Reply #5 on:** April 07, 2011, 07:08:07 PM »

Philippine Electronics Forum