Author Topic: Sony KV-21JDR1, nag oscilate tpos standy agad (Read 835 times)

Lemmor Austria · « **on:** October 20, 2011, 06:54:15 PM »

Mga master ng sony pls help, defect encountered nag ooscilate yung tv tpos standby power agad parang ngpprotect ata eto.nghang nme ng vertical and audio ic,still not effect.pls help

tnx

Philippine Electronics Forum · « **on:** October 20, 2011, 06:54:15 PM »

RhUNhA · « **Reply #1 on:** October 20, 2011, 06:59:15 PM »

lalong mag protect yan kung i float mo sa board,,,

dapat voltage check or resolder po muna kayo..ano daw po ba ang nang yari dito ayun sa tumer mo..

Philippine Electronics Forum · « **Reply #1 on:** October 20, 2011, 06:59:15 PM »

enriz622 · « **Reply #2 on:** October 20, 2011, 07:22:47 PM »

monitor b+ stable ba sis?

Philippine Electronics Forum · « **Reply #2 on:** October 20, 2011, 07:22:47 PM »

BUMBLEBEE · « **Reply #3 on:** October 20, 2011, 07:29:06 PM »

anong parts na ang napalitan mo? ano-ano na mga nagawa mo? TS

Philippine Electronics Forum · « **Reply #3 on:** October 20, 2011, 07:29:06 PM »

DJFEL · « **Reply #4 on:** October 21, 2011, 08:27:22 AM »

pa sub..

Philippine Electronics Forum · « **Reply #4 on:** October 21, 2011, 08:27:22 AM »

BhongTech · « **Reply #5 on:** October 21, 2011, 08:31:49 AM »

subscribing...

unitech · « **Reply #6 on:** October 21, 2011, 09:25:40 AM »

pa abang po muna.............

J@M · « **Reply #7 on:** October 21, 2011, 12:52:09 PM »

Wag mo hang vertical lalo protect yan, check muna ecap PSU & vertical, monitor B+

Lemmor Austria · « **Reply #8 on:** October 21, 2011, 12:55:37 PM »

ala p me pnplitan n parts ngresolder n q,B+ normal bsta mron sya oscilation mron supply comes out from flyback even 200V and 15V and heater lhat normal voltage,but after split second nwwla yng oscilation back to standby power.pls help tnx.

J@M · « **Reply #9 on:** October 21, 2011, 01:29:40 PM »

Ung supply ng vertical tama lng ba? Ano nakkita mo sa sreen.. or wala kc patay agad.

RhUNhA · « **Reply #10 on:** October 22, 2011, 06:42:27 AM »

direct sub mo muna yung VIC mo..then check kung walang open path sa supply nito
diode at ecaps check mo na din.

DJFEL · « **Reply #11 on:** October 22, 2011, 08:21:42 AM »

Quote from: RhUNhA on October 22, 2011, 06:42:27 AM

direct sub mo muna yung VIC mo..then check kung walang open path sa supply nito
diode at ecaps check mo na din.

pa sub...

BUMBLEBEE · « **Reply #12 on:** October 22, 2011, 10:26:57 AM »

i go for loscon and ecap, check also resistor near fbt,, lahat.. lalo na mga high value

Lemmor Austria · « **Reply #13 on:** October 28, 2011, 09:19:42 AM »

mga master ala p rin effect gnun p rin ngplit nme ng vertical ic,lam ko simple trouble lng to pero hndi ko p rin mkita,pls help

Roland · « **Reply #14 on:** October 28, 2011, 09:46:40 AM »

click here for service manual.
http://www.eserviceinfo.com/index.php?what=search2

pete · « **Reply #15 on:** October 28, 2011, 10:03:58 AM »

check resistor 180k connected sa a1019 secondary po

ultrasonic™ · « **Reply #16 on:** October 28, 2011, 11:10:30 AM »

Quote from: pete on October 28, 2011, 10:03:58 AM

check resistor 180k connected sa a1019 secondary po

ayon tinutumbok na ang path ng protection

Lemmor Austria · « **Reply #17 on:** November 12, 2011, 03:28:03 PM »

Thanks PETE ok n tv ko 180K resistor open,thanks din s lhat ng master n ngreply.

??? · « **Reply #18 on:** November 12, 2011, 07:07:21 PM »

Tumbungan kaagad ki sis pete. +1

Congrazz TS ito +1 din.

RhUNhA · « **Reply #19 on:** November 13, 2011, 06:34:01 AM »

ayun pasok ang tumbok mo sis pete,,,

TS congrats

Philippine Electronics Forum · « **Reply #19 on:** November 13, 2011, 06:34:01 AM »

Author Topic: Sony KV-21JDR1, nag oscilate tpos standy agad (Read 835 times)

Philippine Electronics Forum

Philippine Electronics Forum

Philippine Electronics Forum

Philippine Electronics Forum

Philippine Electronics Forum

Philippine Electronics Forum