A2DP bluetooth profile

[trololol]

nag search po ako if what makes a bluetooth headset allow audio transmission
at nakita ko po ito sa wikipedia..

http://en.wikipedia.org/wiki/Bluetooth_profile#Advanced_Audio_Distribution_Profile_.28A2DP.29

tanong ko lng po sna if... special po ba ang isang bluetooth with an A2DP profile?
or can any bluetooth module be configured to have an A2DP profile? salamat po ^_^

[insomartin]

nag search po ako if what makes a bluetooth headset allow audio transmission
at nakita ko po ito sa wikipedia..

http://en.wikipedia.org/wiki/Bluetooth_profile#Advanced_Audio_Distribution_Profile_.28A2DP.29

tanong ko lng po sna if... special po ba ang isang bluetooth with an A2DP profile?
or can any bluetooth module be configured to have an A2DP profile? salamat po ^_^

any bluetooth module be configured to have an A2DP profile?
oo naman, of course kakain ka nang sandamukal na programming at DSP at kung ano ano pa...
pero rock on! kaya mo yaaan!

[trololol]

any bluetooth module be configured to have an A2DP profile?
oo naman, of course kakain ka nang sandamukal na programming at DSP at kung ano ano pa...
pero rock on! kaya mo yaaan!

ganun ba ka intense? haha.. bka po ma turo mo sken kung anu sisimulan ko para gawin ito? xD

[zrehtiek/keitherz]

buy cd-r king or any other bluetooth headset, then get the stereo out.

[rdpzycho]

^ OT: dami talaga nakakahoy sa CD-R King 'no.

[zrehtiek/keitherz]

^"hackable" items store.

[maldihtah13]

Matagal ko na rin gusto gawin ito kaya lang mukhang nosebleed.

[zrehtiek/keitherz]

^ parang USB e, kapal ng documentation.

[tiktak]

CSR ang chip ng CDRKING BT headset ko kaya kung gusto mo gumawa eh bili ka muna ng CSR bluecore chip, programmer, compiler. IIRC may SDK nadin kasama sa set ng bluecore

[zer0w1ng]

I think the one's with CDR-KING are all ROM based.
However, you could hack it and change the configurations by changing values in the i2c eeprom.

Making your own bluetooth headset or A2DP source is not trivial.
If you are serious on making this, the first step is to purchase an SDK from CSR and start from there.

Actually, my main work is developing Bluetooth products here in Cebu ecozone.
And one of my project is a Bluetooth mobile speaker http://www.supertooth.net/EN/produitmusique.htm .
This is using A2DP and AVRCP (Audio/Video Remote Control Profile).
AVRCP is used to control play, pause, forward, reverse, etc.

[trololol]

buy cd-r king or any other bluetooth headset, then get the stereo out.

yun nga sna ggwin ko po pero bka hndi ako payagan kse ginagamit ko ang consumer electronics,
sa opinion nyu po pde lng ba yun?

^ OT: dami talaga nakakahoy sa CD-R King 'no.

cguro sir mura lng kse tapos kung masira mo after hacking, pde lng mka bili ulit

Matagal ko na rin gusto gawin ito kaya lang mukhang nosebleed.

nag *jaw drop* nga ako pag sabi ni sir insomartin na

kakain ka nang sandamukal na programming at DSP at kung ano ano pa.

CSR ang chip ng CDRKING BT headset ko kaya kung gusto mo gumawa eh bili ka muna ng CSR bluecore chip, programmer, compiler. IIRC may SDK nadin kasama sa set ng bluecore

actually sir hndi ko na isip na program pa yung CD-R king BT headset, ung ggwin ko lng nga sna
ay remove yung earphones tapos palitan ng audio jack katulad ng 3.5mm atbp.. pero na isip
ko bka hndi payagan kse hndi ako gumagamit ng PIC MCU

I think the one's with CDR-KING are all ROM based.
However, you could hack it and change the configurations by changing values in the i2c eeprom.

Making your own bluetooth headset or A2DP source is not trivial.
If you are serious on making this, the first step is to purchase an SDK from CSR and start from there.

Actually, my main work is developing Bluetooth products here in Cebu ecozone.
And one of my project is a Bluetooth mobile speaker http://www.supertooth.net/EN/produitmusique.htm .
This is using A2DP and AVRCP (Audio/Video Remote Control Profile).
AVRCP is used to control play, pause, forward, reverse, etc.

sa totoo sir yung nga sna ang talgang ggwin ko.. isang bluetooth mobile speaker with
volume control knob.. pero na isipan ko na gawin isang bluetooth audio reciever na
may maraming jacks like para sa 3.5mm earphones, car stereo atbp para portable
kse alam ko konte lng nmn kinakain na power ung BTooth tapos hndi nmn same
ang power na kinunkunan ng speaker sa BTooth.. tapos ggwin ko ay ang PIC MCU ko
ay mag check kung full na ung battery at near zero na ang current kpg full na at
may mga buttons na nag correspond sa isang audio out slot para pde ma pili kung saan
lalabas ung sound.. hehe

[trololol]

usually po pagkatapos ng thesis ung gnagawa ng mga students ay dismantle nila
ang project pero ung plano ko sna ay gamitin sa bahay pagkatapos