Author Topic: Power cable termination ? (Read 452 times)

squelch · « **on:** April 18, 2012, 03:13:35 PM »

mga boss, ano ba eto ?

Philippine Electronics Forum · « **on:** April 18, 2012, 03:13:35 PM »

??? · « **Reply #1 on:** April 18, 2012, 04:20:27 PM »

Pagkakabit ng mga cable o interconnection ng maayos at gwapo. Pagkakabit ng mga dulo ng wire sa mga terminal box o bar.

Philippine Electronics Forum · « **Reply #1 on:** April 18, 2012, 04:20:27 PM »

j a y k e z · « **Reply #2 on:** April 18, 2012, 04:23:36 PM »

^ wow galeng mo master JS ah +1 to that

Philippine Electronics Forum · « **Reply #2 on:** April 18, 2012, 04:23:36 PM »

p®otocol · « **Reply #3 on:** April 18, 2012, 04:24:11 PM »

eto a good read - for high voltage...

http://multimedia.3m.com/mws/mediawebserver?mwsId=SSSSSu7zK1fslxtUNx_UlxMSev7qe17zHvTSevTSeSSSSSS--

Philippine Electronics Forum · « **Reply #3 on:** April 18, 2012, 04:24:11 PM »

??? · « **Reply #4 on:** April 18, 2012, 04:24:31 PM »

google ko lang yan.

Philippine Electronics Forum · « **Reply #4 on:** April 18, 2012, 04:24:31 PM »

♪ ♫ ♫ ♪ ♪ ♪ ♫ ♫ ♫ · « **Reply #5 on:** April 18, 2012, 04:28:34 PM »

Quote from: squelch on April 18, 2012, 03:13:35 PM

mga boss, ano ba eto ?

power cable means hi power na kable, it could be a hi voltage cable or hi current cable or both.

termination means to bolt or screw the cable to its terminal block.

the one doing it is called "the terminator"

??? · « **Reply #6 on:** April 18, 2012, 06:40:55 PM »

Ano ang tawag dun sa nagsasagawa ng commissioning?

tony · « **Reply #7 on:** April 19, 2012, 08:35:55 AM »

in singapore and in russia where i worked before, you need government issued license to do high voltage cable terminations........for low voltage (not exceeding 1kv) cable terminations, no license are required.

part of cable termination is what is called bolt torquing, bolts are tightend to a specified torque, not too tight nor too lose....

ductor tests are also done to check contact resistance....

♪ ♫ ♫ ♪ ♪ ♪ ♫ ♫ ♫ · « **Reply #8 on:** April 19, 2012, 10:32:34 AM »

Quote from: ??? on April 18, 2012, 06:40:55 PM

Ano ang tawag dun sa nagsasagawa ng commissioning?

ang nagsasagawa nito tinatawag na "the commissioning gang or group" they are "the elite" when all the gang says " clear " the final countdown is for "the commissioner"

five four three two one!!!

kabooommmm!!!!!

danny · « **Reply #9 on:** April 19, 2012, 10:42:39 AM »

Quote from: tony on April 19, 2012, 08:35:55 AM

in singapore and in russia where i worked before, you need government issued license to do high voltage cable terminations........for low voltage (not exceeding 1kv) cable terminations, no license are required.

part of cable termination is what is called bolt torquing, bolts are tightend to a specified torque, not too tight nor too lose....

ductor tests are also done to check contact resistance....

dito naman sir tony
kahit low voltage may lisensiya dapat
malaking penalty pag nahuling wala

♪ ♫ ♫ ♪ ♪ ♪ ♫ ♫ ♫ · « **Reply #10 on:** April 19, 2012, 10:43:20 AM »

Quote from: tony on April 19, 2012, 08:35:55 AM

in singapore and in russia where i worked before, you need government issued license to do high voltage cable terminations........for low voltage (not exceeding 1kv) cable terminations, no license are required.

part of cable termination is what is called bolt torquing, bolts are tightend to a specified torque, not too tight nor too lose....

ductor tests are also done to check contact resistance....

tama kayo, there is what they call a termination kit for power cable and only certified personnel can do this. nasa mga 15k-25k ang termination pay nito.

squelch · « **Reply #11 on:** April 19, 2012, 10:54:48 AM »

kudos to those who contributed..

specially sa mga masters...
+1 knowledge na naman..

Philippine Electronics Forum · « **Reply #11 on:** April 19, 2012, 10:54:48 AM »

Philippine Electronics Forum