Author Topic: compressed air engine (Read 898 times)

adfa4c · « **Reply #20 on:** April 20, 2012, 02:04:53 PM »

cge try ko sa ms paint pero di ko masyado kabisado un,wala din ako scanner hintay na lng cguro n mai-post ko sensya n, syang pala bago lng ako eh d2 electronic technician since 1990 graduate of 2years E.T.

Philippine Electronics Forum · « **Reply #20 on:** April 20, 2012, 02:04:53 PM »

Interlock() · « **Reply #21 on:** April 20, 2012, 02:06:28 PM »

TS: kunsintidor ako, cge explain kp...interested ako...

Philippine Electronics Forum · « **Reply #21 on:** April 20, 2012, 02:06:28 PM »

??? · « **Reply #22 on:** April 20, 2012, 02:07:41 PM »

load mo sa imageshack sir then post mo dito yung link, mababait na sis natin pwede magload na lang dito.

Or post ka ng 50 sa mga technical thread.

Philippine Electronics Forum · « **Reply #22 on:** April 20, 2012, 02:07:41 PM »

insomartin · « **Reply #23 on:** April 20, 2012, 02:12:03 PM »

@adfa4c
mas maganda siguro kung mag ask ka nang question.
make sure na may nagawa ka na sa part mo.
yung mga masters dito nang pneumatics nakatutok sayo.

mostly graduate nang industrial automation, mechanical engineering or at lease tulad ko na tesda mechatronics.
sana ma prototype mo muna yung plan mo gawin. invest ka nang konting pera. then kapag nagkatrouble ka.
then yun yung time na mag intervene kami.

Philippine Electronics Forum · « **Reply #23 on:** April 20, 2012, 02:12:03 PM »

Asarnako · « **Reply #24 on:** April 20, 2012, 03:19:26 PM »

Try mo din sa photobucket.com... copy mo yung img file.. tapos paste mo sa comment box!

Philippine Electronics Forum · « **Reply #24 on:** April 20, 2012, 03:19:26 PM »

adfa4c · « **Reply #25 on:** April 20, 2012, 03:55:33 PM »

ok nga sana mag prototype kaya lng cant' afford ko yan kailangan unahin pag aaral ng mga anak ska di ko pa sure talaga kung magwwork cguro sa inyo jan mga bro kahit mathematical formula pwede malamn kung gagana,subukan ko n lng i-explain d2 thru text mukang mahirapan ako mag-post ng pictures o diagram

adfa4c · « **Reply #26 on:** April 20, 2012, 04:50:48 PM »

halimbawa meron k n cylinder tank filled with 50 psi compressed air,then sa magkabilang dulo may port that connected at the bottom of piston cylinder thru pneumatic hose or pipe, on top of 2 pistons is connecting rod to crank.in between the cylinder tank and piston cylinder which is pneumatic hose or pipe you can put 2 check valves with different direction inside make sure check valve operates one at a time to prevent bypassing and always in opposite direction(check valve is one directional valve that pass air in one direction,correct me if i'm wrong)or you can put small air compressor motor inside to moves the air,if the other one fail(air compressor may also compressed the air in either direction),do you think air will moves if check valves and air compressor operates in reverse and forward?(air compressor may supply with power source.

n0th1n6 · « **Reply #27 on:** April 20, 2012, 04:59:08 PM »

Drawing kahit sa MS Paint lang

Interlock() · « **Reply #28 on:** April 20, 2012, 05:00:55 PM »

mahirap mgconceptualized kung wlang drawing...
drawing is the universal language of an Engineer...

Asarnako · « **Reply #29 on:** April 20, 2012, 05:05:17 PM »

hehehe..

Reverse compression movement....actually walang compression yan....air just drives the piston to move crankshaft in motion..

n0th1n6 · « **Reply #30 on:** April 20, 2012, 05:06:51 PM »

Pag walang ibang source ng pressure, kahit gaano karaming check valves, magi-equalize pa rin ang pressure nyan.

♪ ♫ ♫ ♪ ♪ ♪ ♫ ♫ ♫ · « **Reply #31 on:** April 20, 2012, 05:28:14 PM »

compressed spring engine kaya, tested na ito, marami nito sa toy kingdom

syempre dapat motor driven ang susi, mahirap rin magcrank ng 100km at 100kph capability compressed spring vehicle

adfa4c · « **Reply #32 on:** May 01, 2012, 11:56:53 PM »

Quote from: n0th1n6 on April 20, 2012, 12:47:55 PM

It might oscillate for small amount of time but will soon stop.

thanks to all of the informations i've got a much better idea.

danny · « **Reply #33 on:** May 02, 2012, 02:50:50 AM »

wow
interesting. cge post mo drawing
para makita ng lahat yung better idea mo

Asarnako · « **Reply #34 on:** May 02, 2012, 12:05:36 PM »

Sana maganda yung sususnod na DRAWiNG!

NanotecH · « **Reply #35 on:** May 02, 2012, 02:54:12 PM »

@adfa4c:
parang gusto kong mahilo sa explanation mo...(jowk

)...

ang gusto mo bang mangyari yung air (tank) magsu-supply sa piston (cylinder) at idi-discharge sa labas or ibabalik sa air tank?

may ginawa ako dati, pinaikot ko ang engine using regular compressed air, umikot naman pero insufficient ang pressure dahil 4 cylinder ang engine ko...

check mo rin dito: http://www.electronicslab.ph/forum/index.php?topic=2211.0

ganito yung concept/idea nung ginawa ko...

danny · « **Reply #36 on:** May 02, 2012, 03:31:04 PM »

ang galing talga ni sis nano

01110011 · « **Reply #37 on:** May 02, 2012, 05:04:57 PM »

ganito ba TS?

napulot ko yan sa net, search mo lang "compressed air engine"

danny · « **Reply #38 on:** May 02, 2012, 10:25:43 PM »

ayos

NanotecH · « **Reply #39 on:** May 03, 2012, 06:23:52 AM »

OT:
^musta na, sis...

Philippine Electronics Forum · « **Reply #39 on:** May 03, 2012, 06:23:52 AM »

Author Topic: compressed air engine (Read 898 times)

Philippine Electronics Forum

Philippine Electronics Forum

Philippine Electronics Forum

Philippine Electronics Forum

Philippine Electronics Forum

Philippine Electronics Forum