caramoan tour package

caramoan tour package

« previous next »
Pages: 1 2 [3] 4   Go Down

Author Topic: PCB Toner Transfer Using CD/DVD Label & Laminator  (Read 1581 times)

Offline ♪ ♫ ♫ ♪ ♪ ♪ ♫ ♫ ♫

  • Hydroelectric
  • ***
  • Posts: 3440
  • Pogi/Ganda Points: 123
  • Truth suffers, but never dies.
Re: PCB Toner Transfer Using CD/DVD Label & Laminator
« Reply #40 on: May 29, 2012, 01:51:35 PM »


anong nanyari dito engr? ilang passes nalang...parang okay siguro kung cotton at acetone ang panglinis.

may tanong ako mga sis, hindi ba delikado ang drum ng toner printer sa papel na gamit nyo? wala bang didikit sa drum ng xerox o toner printer galing sa papel na gamit ninyo?
Logged
It's difficult to see the picture when you're inside the frame.

Philippine Electronics Forum

Re: PCB Toner Transfer Using CD/DVD Label & Laminator
« Reply #40 on: May 29, 2012, 01:51:35 PM »

Offline drx2k

  • Size D Battery
  • ******
  • Posts: 326
  • Pogi/Ganda Points: 15
  • Gender: Male
    • Drx2k Network
Re: PCB Toner Transfer Using CD/DVD Label & Laminator
« Reply #41 on: May 29, 2012, 02:47:45 PM »
yung drum ng laser printer ko mukhang natamaan ng accetate kaya nag kaguhit sa mga prints..
Logged

Philippine Electronics Forum

Re: PCB Toner Transfer Using CD/DVD Label & Laminator
« Reply #41 on: May 29, 2012, 02:47:45 PM »

Offline pEN DoTA

  • Gas Turbine
  • **
  • Posts: 2849
  • Pogi/Ganda Points: 183
Re: PCB Toner Transfer Using CD/DVD Label & Laminator
« Reply #42 on: May 29, 2012, 04:06:47 PM »
kung ganun medyo delikado ito? ???
Logged
GOD LOVES YOU

Philippine Electronics Forum

Re: PCB Toner Transfer Using CD/DVD Label & Laminator
« Reply #42 on: May 29, 2012, 04:06:47 PM »

Offline Ikasamoko

  • Solar Power Satellite
  • *****
  • Posts: 5707
  • Pogi/Ganda Points: 412
  • Gender: Male
  • ..sexually deficit..
    • My "BLAG!"
Re: PCB Toner Transfer Using CD/DVD Label & Laminator
« Reply #43 on: May 29, 2012, 05:05:36 PM »
Di ako naniniwala...as long na walang foreign materials or dumi pinasok mo..di magasgas yun...

yung laser ko pinakain ko na ng mga acetate, transparency, tracing paper, magazine paper etc..ok pa naman..
Logged

Philippine Electronics Forum

Re: PCB Toner Transfer Using CD/DVD Label & Laminator
« Reply #43 on: May 29, 2012, 05:05:36 PM »

Offline ???

  • Solar Power Satellite
  • *****
  • Posts: 8178
  • Pogi/Ganda Points: 414
Re: PCB Toner Transfer Using CD/DVD Label & Laminator
« Reply #44 on: May 29, 2012, 05:07:11 PM »
^Anong brand at model number nyan sis.  ;D
Logged
*http://www.elab.ph/forum/index.php?topic=33717.msg632945#msg632945
*http://www.elab.ph/forum/index.php?topic=37150.0

Philippine Electronics Forum

Re: PCB Toner Transfer Using CD/DVD Label & Laminator
« Reply #44 on: May 29, 2012, 05:07:11 PM »

Offline Ikasamoko

  • Solar Power Satellite
  • *****
  • Posts: 5707
  • Pogi/Ganda Points: 412
  • Gender: Male
  • ..sexually deficit..
    • My "BLAG!"
Re: PCB Toner Transfer Using CD/DVD Label & Laminator
« Reply #45 on: May 29, 2012, 05:09:09 PM »
Sister..este Brother HL-2140 series...;D
Logged

Offline ???

  • Solar Power Satellite
  • *****
  • Posts: 8178
  • Pogi/Ganda Points: 414
Re: PCB Toner Transfer Using CD/DVD Label & Laminator
« Reply #46 on: May 29, 2012, 05:11:23 PM »
Magkano sis ang ganyan ngayon? mukhang 2,500 na lang yata yan to 3,500.
Logged
*http://www.elab.ph/forum/index.php?topic=33717.msg632945#msg632945
*http://www.elab.ph/forum/index.php?topic=37150.0

Offline RiDdLeR???

  • Hydroelectric
  • ***
  • Posts: 3032
  • Pogi/Ganda Points: 208
Re: PCB Toner Transfer Using CD/DVD Label & Laminator
« Reply #47 on: May 29, 2012, 05:35:52 PM »
Quote from: drx2k on May 29, 2012, 02:47:45 PM
yung drum ng laser printer ko mukhang natamaan ng accetate kaya nag kaguhit sa mga prints..
ilan beses ko na dinismantel at nilinis yung drum ng laser printer ko dahil may mga lines pero wala pala sa drum kundi sa lense.  paglinis ko ng lense, parang b/new ulit mag printout.
Logged

Offline Ikasamoko

  • Solar Power Satellite
  • *****
  • Posts: 5707
  • Pogi/Ganda Points: 412
  • Gender: Male
  • ..sexually deficit..
    • My "BLAG!"
Re: PCB Toner Transfer Using CD/DVD Label & Laminator
« Reply #48 on: May 29, 2012, 05:37:52 PM »
nasa 6k pa kuha ko nito sis...
Logged

Offline insomartin

  • Technical People
  • Nuclear Reactor
  • *****
  • Posts: 4828
  • Pogi/Ganda Points: 320
  • Gender: Male
  • Nalulunod lang...
Re: PCB Toner Transfer Using CD/DVD Label & Laminator
« Reply #49 on: May 29, 2012, 06:47:47 PM »
Quote from: alyas on May 29, 2012, 05:35:52 PM
ilan beses ko na dinismantel at nilinis yung drum ng laser printer ko dahil may mga lines pero wala pala sa drum kundi sa lense.  paglinis ko ng lense, parang b/new ulit mag printout.

I CONCUR. mirrors and lens talaga madalas madumihan.
Logged

Offline Engr. Dacuycoy

  • Diesel Generator
  • *
  • Posts: 1032
  • Pogi/Ganda Points: 163
  • Proton Orcad EasyPCB User
Re: PCB Toner Transfer Using CD/DVD Label & Laminator
« Reply #50 on: May 29, 2012, 07:04:55 PM »
Quote from: Kasamiko on May 29, 2012, 05:05:36 PM
Di ako naniniwala...as long na walang foreign materials or dumi pinasok mo..di magasgas yun...

yung laser ko pinakain ko na ng mga acetate, transparency, tracing paper, magazine paper etc..ok pa naman..

i concur  ;D
Logged
I'm a Mechanically trained, electronic to me is just an hobby and if I can do it, so can you!
Don't get discouraged by those so called "EXPERT"! I can tell you most of the time they "TALK" only but with no practical results.
Seldom people succeed the first time, just keep on trying!

Offline Ikasamoko

  • Solar Power Satellite
  • *****
  • Posts: 5707
  • Pogi/Ganda Points: 412
  • Gender: Male
  • ..sexually deficit..
    • My "BLAG!"
Re: PCB Toner Transfer Using CD/DVD Label & Laminator
« Reply #51 on: May 29, 2012, 07:55:46 PM »
yung sakin naman sa right side na bale sa edge na ng paper meron parang rectangle mga 1mmx1.5mm cguro every 2" intervals..di  ko alam kung anu dahilan..hinayaan ko na lng..;D
Logged

Offline profpat

  • Size C Battery
  • *****
  • Posts: 165
  • Pogi/Ganda Points: 9
  • Gender: Male
  • "pag gawa ng tao! kaya natin ayusin"
    • LCD REPAIR PHILIPPINES
Re: PCB Toner Transfer Using CD/DVD Label & Laminator
« Reply #52 on: July 02, 2012, 03:15:21 PM »
pwede kaya gamitin yung laminator ng cdrking? plantsa lang ng commander gamit ko!
Logged

Offline elab

  • CR2032 Battery
  • **
  • Posts: 9
  • Pogi/Ganda Points: 0
Re: PCB Toner Transfer Using CD/DVD Label & Laminator
« Reply #53 on: July 02, 2012, 08:07:46 PM »
^pwede siguro..i-tweak/adjust lang siguro yung feeder para magkasya yung pcb
Logged

Offline Ikasamoko

  • Solar Power Satellite
  • *****
  • Posts: 5707
  • Pogi/Ganda Points: 412
  • Gender: Male
  • ..sexually deficit..
    • My "BLAG!"
Re: PCB Toner Transfer Using CD/DVD Label & Laminator
« Reply #54 on: July 02, 2012, 08:29:04 PM »
0.5mm or 0.6mm lang yata max thickness...
Logged

Offline Ikasamoko

  • Solar Power Satellite
  • *****
  • Posts: 5707
  • Pogi/Ganda Points: 412
  • Gender: Male
  • ..sexually deficit..
    • My "BLAG!"
Re: PCB Toner Transfer Using CD/DVD Label & Laminator
« Reply #55 on: July 02, 2012, 08:32:22 PM »
Pangit result pag meron tape...di uniform yung kapit ng toner..
Logged

Offline Deantyne

  • Lead Acid Battery
  • *******
  • Posts: 929
  • Pogi/Ganda Points: 90
  • Gender: Male
  • Focus my friend...
Re: PCB Toner Transfer Using CD/DVD Label & Laminator
« Reply #56 on: July 03, 2012, 11:18:59 AM »
^paano gawin Kas para di ma-moved yong paper?
Logged
BACK TO BASICS

Offline Ikasamoko

  • Solar Power Satellite
  • *****
  • Posts: 5707
  • Pogi/Ganda Points: 412
  • Gender: Male
  • ..sexually deficit..
    • My "BLAG!"
Re: PCB Toner Transfer Using CD/DVD Label & Laminator
« Reply #57 on: July 03, 2012, 11:29:30 AM »
make sure na mas malaki ng konti yung PCB mo kesa sa layout..sakin, i leave 0.5" margin around the board..thne yung paper mo medyo malaki rin ng konti on 1 side para pwede mo ma fold about 1" fold ko at iyun ang una ko feed sa laminator..
dapat naka center na yung design sa PCB before folding one end..
Logged

Offline Deantyne

  • Lead Acid Battery
  • *******
  • Posts: 929
  • Pogi/Ganda Points: 90
  • Gender: Male
  • Focus my friend...
Re: PCB Toner Transfer Using CD/DVD Label & Laminator
« Reply #58 on: July 03, 2012, 11:49:00 AM »
^ok.. nice job 356+1 for the share.. :-)
Logged
BACK TO BASICS

Offline insomartin

  • Technical People
  • Nuclear Reactor
  • *****
  • Posts: 4828
  • Pogi/Ganda Points: 320
  • Gender: Male
  • Nalulunod lang...
Re: PCB Toner Transfer Using CD/DVD Label & Laminator
« Reply #59 on: July 03, 2012, 11:54:00 AM »
sa laminator, yung rollers di naman talaga mag slislip. matagal na ako gumagamit nang laminating machine.
Logged

Philippine Electronics Forum

Re: PCB Toner Transfer Using CD/DVD Label & Laminator
« Reply #59 on: July 03, 2012, 11:54:00 AM »
Pages: 1 2 [3] 4   Go Up
« previous next »
 

Privacy Policy

Contact Us: elabph@yahoo.com