Author Topic: Which C is better for proteus (Read 1308 times)

maldihtah13 · « **on:** July 24, 2008, 11:21:27 AM »

I'm thinking of learning C programming for PIC using proteus as my simulator, what C assembler should I use?

Philippine Electronics Forum · « **on:** July 24, 2008, 11:21:27 AM »

glutnix_neo · « **Reply #1 on:** July 24, 2008, 11:26:28 AM »

Anything. Kung saan ka comfortable. Hex(compiled code) pa rin naman ang inira-run ng proteus.

Philippine Electronics Forum · « **Reply #1 on:** July 24, 2008, 11:26:28 AM »

paranz · « **Reply #2 on:** July 24, 2008, 11:29:02 AM »

yup tama ok lang kahit anong C compiler.

i tried CCS C, hitech C, and C18 sa proteus. And it doesnt matter yung .coff or .hex file ang kailangan ma-open

Philippine Electronics Forum · « **Reply #2 on:** July 24, 2008, 11:29:02 AM »

maldihtah13 · « **Reply #3 on:** July 24, 2008, 11:30:48 AM »

Alin kya madali ang integration? Yung tipong pagpress mo ng compile deretso simulation na tapos pwede mo rin tingnan yung c code ng step by step.

Philippine Electronics Forum · « **Reply #3 on:** July 24, 2008, 11:30:48 AM »

glutnix_neo · « **Reply #4 on:** July 24, 2008, 11:35:35 AM »

I'm not sure kung may debug feature ang proteus, alam ko simulation lang talaga dun (hardware simulation),

natry ko debug and simulate sa mplab sim gamit ang ccs, ewan ko lang kung may support ang mplab sa ibang compiler.

Philippine Electronics Forum · « **Reply #4 on:** July 24, 2008, 11:35:35 AM »

paranz · « **Reply #5 on:** July 24, 2008, 11:42:51 AM »

meron proteus viewer ang MPLAB, enable mo lang sa Debugger menu ng MPLAB ang Proteus VSM.

You can do single-stepping or animation in MPLAB then view the response in the proteus viewer. The proteus viewer is a window in MPLAB

You can also debug directly in Proteus. Make sure you select the .coff file instead of the .hex

maldihtah13 · « **Reply #6 on:** July 24, 2008, 12:35:01 PM »

Sir pakipost nman latest vesion number ng mga c compiler nyo pra malaman ko ang latest

paranz · « **Reply #7 on:** July 24, 2008, 12:58:39 PM »

im not sure kung anong mga version ang latest..

sa CCS C, im still using version 3.203. Old na ito

Sa hitech-C, version 9.6 ang gamit ko.

Sa C18 naman, V3.15. Binigay pa ito ni sir motion55 sa akin noon. Im not sure ano ang latest ngayun.

and PICC18 v8.35.

maldihtah13 · « **Reply #8 on:** July 24, 2008, 02:12:52 PM »

CCS C, meron na ako version 4.074

hitech-C, version 9.6 std. ang nakuha ko

C18 naman baka hindi muna

PICC18 ska na rin

Philippine Electronics Forum · « **Reply #8 on:** July 24, 2008, 02:12:52 PM »

Philippine Electronics Forum