caramoan tour package

caramoan tour package

« previous next »
Pages: [1] 2 3   Go Down

Author Topic: DIY CPLD/FPGA Programmer  (Read 7002 times)

Offline rdpzycho

  • Technical People
  • Solar Power Satellite
  • *****
  • Posts: 10724
  • Pogi/Ganda Points: 630
  • Gender: Male
  • Respect Begets Respect
    • rdpzycho
DIY CPLD/FPGA Programmer
« on: July 30, 2008, 09:32:48 PM »
sino po may experience dito with DIY hardware? gusto ko ring matuto ng CPLD/FPGA pero start muna ako sa CPLD. hehehe.
Logged
‎"Divide each difficulty into as many parts as is feasible and necessary to resolve it."
- Rene Descartes

"For every difficult problem there is always a simple answer and most of them are wrong."
- Clayton Paul

Philippine Electronics Forum

DIY CPLD/FPGA Programmer
« on: July 30, 2008, 09:32:48 PM »

Offline paranz

  • Technical People
  • Nuclear Reactor
  • *****
  • Posts: 4525
  • Pogi/Ganda Points: 177
  • Gender: Male
  • 1/4W resistor specialist
    • RapidSignal Electronics
Re: DIY CPLD/FPGA Programmer
« Reply #1 on: July 30, 2008, 09:36:56 PM »
i tot meron ka na i-share na complete DIY hehe.. i can give you 10 pogi points for that kasi interested din talaga ako..
Logged
PIC16 Programming Tutorial using MPLAB and Hi-Tech C
www.rapidsignalph.com/tutorials/pic16-tutorials

Arduino & gizDuino Tutorials
www.rapidsignalph.com/tutorials/arduino-tutorials

Philippine Electronics Forum

Re: DIY CPLD/FPGA Programmer
« Reply #1 on: July 30, 2008, 09:36:56 PM »

Offline Born2BeWired

  • Technical People
  • Diesel Generator
  • *****
  • Posts: 1113
  • Pogi/Ganda Points: 168
  • Gender: Male
  • Analog and Precision Circuits Junkie
    • e-Gizmo Mechatronix Central
Re: DIY CPLD/FPGA Programmer
« Reply #2 on: July 30, 2008, 09:43:13 PM »
Check mo sa altera website. Kung OK sa iyo yung MAX II CPLD nila, may schematic sa paggawa ng sariling JTAG cable (sa parallel port nga lang), 1 year free license sa dev software nila (Quartus), etc..
Logged
Electronics <- Once you got a taste of it, you will never get enough.

Insanity <- Doing the same thing, expecting different results.

"The more I learn, the more I am humbled."

Philippine Electronics Forum

Re: DIY CPLD/FPGA Programmer
« Reply #2 on: July 30, 2008, 09:43:13 PM »

Offline rdpzycho

  • Technical People
  • Solar Power Satellite
  • *****
  • Posts: 10724
  • Pogi/Ganda Points: 630
  • Gender: Male
  • Respect Begets Respect
    • rdpzycho
Re: DIY CPLD/FPGA Programmer
« Reply #3 on: July 30, 2008, 09:49:07 PM »
thanks sir Born2BeWired. mukhang Altera din yung gagamitin ko. 600 gates lang muna. ;D

malas lang walang Parallel Port yung mismong PC ko sa office. hehehe. yung FTDI merong chip na merong Parallel output para sa JTAG. madalas ko nga lang makita para sa ARM ginamit (yun din gamit dun sa Luminary Micro board ko, baka pwede i-modify ;D).
Logged
‎"Divide each difficulty into as many parts as is feasible and necessary to resolve it."
- Rene Descartes

"For every difficult problem there is always a simple answer and most of them are wrong."
- Clayton Paul

Philippine Electronics Forum

Re: DIY CPLD/FPGA Programmer
« Reply #3 on: July 30, 2008, 09:49:07 PM »

Offline paranz

  • Technical People
  • Nuclear Reactor
  • *****
  • Posts: 4525
  • Pogi/Ganda Points: 177
  • Gender: Male
  • 1/4W resistor specialist
    • RapidSignal Electronics
Re: DIY CPLD/FPGA Programmer
« Reply #4 on: July 30, 2008, 10:00:38 PM »
Quote from: Born2BeWired on July 30, 2008, 09:43:13 PM
Check mo sa altera website. Kung OK sa iyo yung MAX II CPLD nila, may schematic sa paggawa ng sariling JTAG cable (sa parallel port nga lang), 1 year free license sa dev software nila (Quartus), etc..

MAXII CPLD is good enough already.. mas madali din gawan ng DIY board kasi kunti lang ang pin (100?).. pwede rin MAX+plus II instead na quartus..

yung parallel port based JTAG cable uses only 74HC244 chip plus about 20 resistors.. kulang nalang yung CPLD chip na mismo :D
Logged
PIC16 Programming Tutorial using MPLAB and Hi-Tech C
www.rapidsignalph.com/tutorials/pic16-tutorials

Arduino & gizDuino Tutorials
www.rapidsignalph.com/tutorials/arduino-tutorials

Philippine Electronics Forum

Re: DIY CPLD/FPGA Programmer
« Reply #4 on: July 30, 2008, 10:00:38 PM »

Offline rdpzycho

  • Technical People
  • Solar Power Satellite
  • *****
  • Posts: 10724
  • Pogi/Ganda Points: 630
  • Gender: Male
  • Respect Begets Respect
    • rdpzycho
Re: DIY CPLD/FPGA Programmer
« Reply #5 on: July 30, 2008, 10:07:25 PM »
MAX lang yung gagamitin ko. hehe. 168.70 from Farnell yung 600 gates.
Logged
‎"Divide each difficulty into as many parts as is feasible and necessary to resolve it."
- Rene Descartes

"For every difficult problem there is always a simple answer and most of them are wrong."
- Clayton Paul

Offline paranz

  • Technical People
  • Nuclear Reactor
  • *****
  • Posts: 4525
  • Pogi/Ganda Points: 177
  • Gender: Male
  • 1/4W resistor specialist
    • RapidSignal Electronics
Re: DIY CPLD/FPGA Programmer
« Reply #6 on: July 30, 2008, 10:16:44 PM »
meron din sa e-gizmo...

EPM7032LC44  44-pin PLCC
EPM7160ELC84-12 84-pin PLCC

matanong nga bukas kung meron ba sila stock and how much..
Logged
PIC16 Programming Tutorial using MPLAB and Hi-Tech C
www.rapidsignalph.com/tutorials/pic16-tutorials

Arduino & gizDuino Tutorials
www.rapidsignalph.com/tutorials/arduino-tutorials

Offline rdpzycho

  • Technical People
  • Solar Power Satellite
  • *****
  • Posts: 10724
  • Pogi/Ganda Points: 630
  • Gender: Male
  • Respect Begets Respect
    • rdpzycho
Re: DIY CPLD/FPGA Programmer
« Reply #7 on: July 30, 2008, 10:39:34 PM »
sana mura lang. hehehe. kailangan ko rin ng probe galing sa kanila. hehe.
Logged
‎"Divide each difficulty into as many parts as is feasible and necessary to resolve it."
- Rene Descartes

"For every difficult problem there is always a simple answer and most of them are wrong."
- Clayton Paul

Offline Born2BeWired

  • Technical People
  • Diesel Generator
  • *****
  • Posts: 1113
  • Pogi/Ganda Points: 168
  • Gender: Male
  • Analog and Precision Circuits Junkie
    • e-Gizmo Mechatronix Central
Re: DIY CPLD/FPGA Programmer
« Reply #8 on: July 30, 2008, 10:43:29 PM »
Quote from: paranz on July 30, 2008, 10:16:44 PM
meron din sa e-gizmo...

EPM7032LC44  44-pin PLCC
EPM7160ELC84-12 84-pin PLCC

matanong nga bukas kung meron ba sila stock and how much..

May konting bad news, yung mga part number na yan walang JTAG, hindi ISP, kailangan pa ng separate programmer. Hanap kayo na may S sa part no..
Logged
Electronics <- Once you got a taste of it, you will never get enough.

Insanity <- Doing the same thing, expecting different results.

"The more I learn, the more I am humbled."

Offline paranz

  • Technical People
  • Nuclear Reactor
  • *****
  • Posts: 4525
  • Pogi/Ganda Points: 177
  • Gender: Male
  • 1/4W resistor specialist
    • RapidSignal Electronics
Re: DIY CPLD/FPGA Programmer
« Reply #9 on: July 30, 2008, 10:44:29 PM »
nagtanong ako early this year, wala pa daw sila price para sa mga CPLDs na yan. Sana bukas mag-inquire ako meron na..

ito talaga ang gusto kung gawin dati, kaso dumating sa buhay ko ang PIC18F4550 board, kaya USB muna ;D
Logged
PIC16 Programming Tutorial using MPLAB and Hi-Tech C
www.rapidsignalph.com/tutorials/pic16-tutorials

Arduino & gizDuino Tutorials
www.rapidsignalph.com/tutorials/arduino-tutorials

Offline paranz

  • Technical People
  • Nuclear Reactor
  • *****
  • Posts: 4525
  • Pogi/Ganda Points: 177
  • Gender: Male
  • 1/4W resistor specialist
    • RapidSignal Electronics
Re: DIY CPLD/FPGA Programmer
« Reply #10 on: July 30, 2008, 10:46:01 PM »
Quote from: Born2BeWired on July 30, 2008, 10:43:29 PM
May konting bad news, yung mga part number na yan walang JTAG, hindi ISP, kailangan pa ng separate programmer. Hanap kayo na may S sa part no..

bad news nga :(

ito kaya pwede? EMP7128SLC84 plcc 84-pin
Logged
PIC16 Programming Tutorial using MPLAB and Hi-Tech C
www.rapidsignalph.com/tutorials/pic16-tutorials

Arduino & gizDuino Tutorials
www.rapidsignalph.com/tutorials/arduino-tutorials

Offline Born2BeWired

  • Technical People
  • Diesel Generator
  • *****
  • Posts: 1113
  • Pogi/Ganda Points: 168
  • Gender: Male
  • Analog and Precision Circuits Junkie
    • e-Gizmo Mechatronix Central
Re: DIY CPLD/FPGA Programmer
« Reply #11 on: July 30, 2008, 10:48:47 PM »
Quote from: paranz on July 30, 2008, 10:46:01 PM
bad news nga :(

ito kaya pwede? EMP7128SLC84 plcc 84-pin

Yan, may S, Pwede. ;D ;D :D
Logged
Electronics <- Once you got a taste of it, you will never get enough.

Insanity <- Doing the same thing, expecting different results.

"The more I learn, the more I am humbled."

Offline paranz

  • Technical People
  • Nuclear Reactor
  • *****
  • Posts: 4525
  • Pogi/Ganda Points: 177
  • Gender: Male
  • 1/4W resistor specialist
    • RapidSignal Electronics
Re: DIY CPLD/FPGA Programmer
« Reply #12 on: July 30, 2008, 10:53:32 PM »
ah oki. ty po ;D
Logged
PIC16 Programming Tutorial using MPLAB and Hi-Tech C
www.rapidsignalph.com/tutorials/pic16-tutorials

Arduino & gizDuino Tutorials
www.rapidsignalph.com/tutorials/arduino-tutorials

Online agimat

  • Size AAA Battery
  • ***
  • Posts: 67
  • Pogi/Ganda Points: 1
    • PHP Programmer . Python . Ruby . Manila . Philippines
Re: DIY CPLD/FPGA Programmer
« Reply #13 on: July 31, 2008, 12:10:24 AM »
Ang ganda nung MAX II, $150. Kaso magkano kaya shipping and tatagain ng custom bago makuha?



Logged
rlachenal.com - PHP Programmer . Python . Ruby . Manila . Philippines
loadmango.com  - The juiciest prepaid card deals online

Offline rdpzycho

  • Technical People
  • Solar Power Satellite
  • *****
  • Posts: 10724
  • Pogi/Ganda Points: 630
  • Gender: Male
  • Respect Begets Respect
    • rdpzycho
Re: DIY CPLD/FPGA Programmer
« Reply #14 on: July 31, 2008, 12:33:17 AM »
nasa $55 tp $80 siguro (kung available sa Mouser, $55 yung standard shipping cost nila kung kasya sa sukat nun).

12% VAT plus Documentary stamps. ang typical estimate ko na lang (Cost + Shipping) x 1.3. at most na siguro 'yun. unless ang tingin ng customs e ibebenta yung product, baka magkaroon ng duties na 35% ata.
Logged
‎"Divide each difficulty into as many parts as is feasible and necessary to resolve it."
- Rene Descartes

"For every difficult problem there is always a simple answer and most of them are wrong."
- Clayton Paul

Offline glutnix_neo

  • Technical People
  • Nuclear Reactor
  • *****
  • Posts: 4158
  • Pogi/Ganda Points: 165
  • Gender: Female
  • A journey to a thousand lines begins w/ LED Blink
    • Underground Workbench
Re: DIY CPLD/FPGA Programmer
« Reply #15 on: July 31, 2008, 10:16:38 AM »
Quote from: rdpzycho on July 30, 2008, 09:32:48 PM
sino po may experience dito with DIY hardware? gusto ko ring matuto ng CPLD/FPGA pero start muna ako sa CPLD. hehehe.

Search nyo byte blaster, IIRC its for altera FPGA.
Logged
If we hear,we forget;if we see, we remember;if we do,we understand.
Let's support the use of free and open source softwares...
http://UndergroundWorkbench.wordpress.com

Offline glutnix_neo

  • Technical People
  • Nuclear Reactor
  • *****
  • Posts: 4158
  • Pogi/Ganda Points: 165
  • Gender: Female
  • A journey to a thousand lines begins w/ LED Blink
    • Underground Workbench
Re: DIY CPLD/FPGA Programmer
« Reply #16 on: July 31, 2008, 10:19:51 AM »
Logged
If we hear,we forget;if we see, we remember;if we do,we understand.
Let's support the use of free and open source softwares...
http://UndergroundWorkbench.wordpress.com

Offline rdpzycho

  • Technical People
  • Solar Power Satellite
  • *****
  • Posts: 10724
  • Pogi/Ganda Points: 630
  • Gender: Male
  • Respect Begets Respect
    • rdpzycho
Re: DIY CPLD/FPGA Programmer
« Reply #17 on: July 31, 2008, 09:18:10 PM »
kailangan ko na talaga ulit ng parallel port. hehehe.

ang isang tinitingnan ko kung pwede yung JTAG programmer nung Lumiary Micro kit ko. JTAG output din kasi tapos madali i-modify yung codes dahil based sa isang FTDI chip.
Logged
‎"Divide each difficulty into as many parts as is feasible and necessary to resolve it."
- Rene Descartes

"For every difficult problem there is always a simple answer and most of them are wrong."
- Clayton Paul

Offline marcelino

  • Moderator
  • Solar Power Satellite
  • *****
  • Posts: 6016
  • Pogi/Ganda Points: 258
  • ...keep moving forward! - Robinson's
Re: DIY CPLD/FPGA Programmer
« Reply #18 on: August 03, 2008, 10:23:55 PM »
go mga kaibigan!

pakwento kung successful kayo... hehehe...
gustong gusto ko din magkaroon ng development board ng CPLD or FPGA...
Logged
"Don't take life seriously. After all, no one has ever come out of it alive. -Bugs Bunny"

Offline rdpzycho

  • Technical People
  • Solar Power Satellite
  • *****
  • Posts: 10724
  • Pogi/Ganda Points: 630
  • Gender: Male
  • Respect Begets Respect
    • rdpzycho
Re: DIY CPLD/FPGA Programmer
« Reply #19 on: August 03, 2008, 10:46:15 PM »
gusto kong explore yung FT2232 from FTDI. meron kasing USB to JTAG programming (using Bit Bang Mode). this way mas madali mag-experiment sa laptop ko. wala na kasing parallel port ang mga laptop. ;D

http://www.ftdichip.com/Documents/DataSheets/DS_FT2232D.pdf

medyo mahal nga lang yung FT2232, nasa 600+ ata. meron na sa Luminary Micro board ko pero para sa ARM yung JTAG. kung imo-modify ko baka kailanganin kong pag-aralan ng JTAG at yung way ng pag-program ng mga CPLD. hehehe. matagal na naman 'to. lagi na lang busy sa ibang project. tapos 'pag nasa bahay na, puro internet na lang ginagawa. hehe.
Logged
‎"Divide each difficulty into as many parts as is feasible and necessary to resolve it."
- Rene Descartes

"For every difficult problem there is always a simple answer and most of them are wrong."
- Clayton Paul

Philippine Electronics Forum

Re: DIY CPLD/FPGA Programmer
« Reply #19 on: August 03, 2008, 10:46:15 PM »
Pages: [1] 2 3   Go Up
« previous next »
 

Privacy Policy

Contact Us: elabph@yahoo.com