NICE: just add

[underprezzure]

@-=Rafft=-
Salamat sa information. I will share my own design once I will finish it. 

-underpazz campaigns for more post on technical threads

[jepps137]

naisip ko for the tilt sensor, bili ka ng rubber/plastic tubing, insert a solid wire sa loob ng tubing, this will be your reference, tapos puncture the tubing at regular intervals para pwede ka maginsert ng wires din dun, make sure na sealed yung pinagtusukan. then form the tubing into a semicircle. seal one end, lagyan mo ng kaunting mercury, then seal the other end again. may tilt sensor ka na.

[underprezzure]

@jepps137

in simple terms you are just referring me to buy "mercury tilt sensor". available na kasi yan sa market and jan nakabase ang design ko sa itaas gaya ng sinabi ko kay -=Rafft=- . Handling mercury isn't that easy since it can cause environment hazards. kaya better buy mercury tilt sensor rather than doing it on your own.

-underpazz campaigns for more post on technical threads

[jepps137]

ahh, kala ko gusto mo DIY.
howbout hacking an old ball based mouse, use the slotted disc and the sensors dun, tapos may nakatusok na bob sa axle niya. yun lang nga, baka jerky movements din.

[RaffT]

ETO NAMAN // SCROLLING LED na maliit

http://www.instructables.com/id/Dot_Matrix_Business_Card/