caramoan tour package

caramoan tour package

Author Topic: i am in need of ELECTRONICS ENGINEER... for my project  (Read 2069 times)

Offline jonan_laze77

  • LR44 Battery
  • *
  • Posts: 6
  • Pogi/Ganda Points: 0
i am in need of ELECTRONICS ENGINEER... for my project
« on: November 16, 2008, 07:37:19 PM »
So. here I start.

Ahmm.. kelangan ko po kasi ng ELECTRONICS ENGINEER...or anybody who can help me out with my INVESITGATORY PROJECT about the POLONIUM PEN.

SPEAKING OF MY POLONIUM PEN... it has a circuit, na sabi ng most people ay ELECTRONICS ENGINEER ang gumagawa. I have the complete instructions kung paano gawin yung project ko.. the materials are like transistors, resistors, brass tubing, beads, kapton tape, an LED, power switch, screw, standoff, alkaline battery and the like. marami ang mga materials pero ang lahat ay kelangan naman upang magawa ang POLONIUM PEN.

Does it really sound like I need aid from an ELECTRONICS ENGINEER?

Does it?

So, if it does.

Then, please reply on this thread/topic. and I hope you can help me

Im willing to pay.

hope you'll have interest on my wish.
Thanks,.

Philippine Electronics Forum

i am in need of ELECTRONICS ENGINEER... for my project
« on: November 16, 2008, 07:37:19 PM »

Offline ♪ ♫ ♫ ♪ ♪ ♪ ♫ ♫ ♫

  • Hydroelectric
  • ***
  • Posts: 3439
  • Pogi/Ganda Points: 123
  • Truth suffers, but never dies.
Re: i am in need of ELECTRONICS ENGINEER... for my project
« Reply #1 on: November 16, 2008, 08:40:30 PM »

May i know sir, what is the objectives of that project?

And also what are the usage of that Polonium Pen?

It's difficult to see the picture when you're inside the frame.

Philippine Electronics Forum

Re: i am in need of ELECTRONICS ENGINEER... for my project
« Reply #1 on: November 16, 2008, 08:40:30 PM »

Offline Google

  • Diesel Generator
  • *
  • Posts: 1378
  • Pogi/Ganda Points: 20
Re: i am in need of ELECTRONICS ENGINEER... for my project
« Reply #2 on: November 16, 2008, 08:46:55 PM »
mechanical engineer ata kailangan nyo sir sa ganyang project

 ??? ??? ???
“If you limit your choices only to what seems possible or reasonable, you disconnect yourself from what you truly want, and all that is left is compromise.”

Philippine Electronics Forum

Re: i am in need of ELECTRONICS ENGINEER... for my project
« Reply #2 on: November 16, 2008, 08:46:55 PM »

Offline jonan_laze77

  • LR44 Battery
  • *
  • Posts: 6
  • Pogi/Ganda Points: 0
Re: i am in need of ELECTRONICS ENGINEER... for my project
« Reply #3 on: November 16, 2008, 08:52:04 PM »
wag na po sir tawag nio sakin. jonan na lng po. nahihiya ako ee. kasi alam ko super gagaling ng mga tao dito...

hehe.

ahm .

so etoh po ang nasa IP ko...
---------------------


Statement of the Problem:

This study focuses on the detection of Polonium in substances. It seeks to answer the following questions:
1. Is it possible to produce a polonium pen with a pocket-sized ion chamber    circuit?
2. Do substances have too much Polonium?
3. Does time affect the Polonium’s alpha decay?
4. Does the amount of substance influence the Polonium’s alpha decay?

Hypotheses:
The researcher considers the following hypotheses in his study:
1. It is possible to produce a polonium pen with a pocket-sized ion chamber           circuit.
   2. Substances do have too much Polonium.
   3. Time affects the Polonium’s alpha decay.
   4. The amount of substance influences the Polonium’s alpha decay.


so ayan po ang objectives ko.. in the form of statements of the problem and their hypotheses..

hope those things help.

Philippine Electronics Forum

Re: i am in need of ELECTRONICS ENGINEER... for my project
« Reply #3 on: November 16, 2008, 08:52:04 PM »

Offline Google

  • Diesel Generator
  • *
  • Posts: 1378
  • Pogi/Ganda Points: 20
Re: i am in need of ELECTRONICS ENGINEER... for my project
« Reply #4 on: November 16, 2008, 08:54:00 PM »
ok lang po yun respetuhan lang po dito lalo n kung mga newbie mga sir and mam tawag namin pero kung matagal n sis na tawag nmin  ;D ;D ;D

nyayyy mukang  PHYSICIST ata  ang kailangan nyo sir  ;D ;D ;D ;D
“If you limit your choices only to what seems possible or reasonable, you disconnect yourself from what you truly want, and all that is left is compromise.”

Philippine Electronics Forum

Re: i am in need of ELECTRONICS ENGINEER... for my project
« Reply #4 on: November 16, 2008, 08:54:00 PM »

Offline jonan_laze77

  • LR44 Battery
  • *
  • Posts: 6
  • Pogi/Ganda Points: 0
Re: i am in need of ELECTRONICS ENGINEER... for my project
« Reply #5 on: November 16, 2008, 09:05:51 PM »
ndi naman po sir. hehe!!!

engineer po..or electrician will do.

hehe etoh po ung schematic diagram..



Offline zer0w1ng

  • Technical People
  • Gas Turbine
  • *****
  • Posts: 2179
  • Pogi/Ganda Points: 305
  • Gender: Male
  • Enter any 11-digit prime number to continue...
    • The Cebuano Geek
Re: i am in need of ELECTRONICS ENGINEER... for my project
« Reply #6 on: November 16, 2008, 09:11:32 PM »
Not an electrician.

Any electronics technician or hobbyist could do this.
Even our 14? year old member here, nucleus could do this also. :)

But this is difficult to test if because we don't have radioactive materials here.
The Cebuano Geek

Offline Google

  • Diesel Generator
  • *
  • Posts: 1378
  • Pogi/Ganda Points: 20
Re: i am in need of ELECTRONICS ENGINEER... for my project
« Reply #7 on: November 16, 2008, 09:24:25 PM »
kaya siya ng electrician pero yung radioactive material ang magiging problema
“If you limit your choices only to what seems possible or reasonable, you disconnect yourself from what you truly want, and all that is left is compromise.”

Offline ♪ ♫ ♫ ♪ ♪ ♪ ♫ ♫ ♫

  • Hydroelectric
  • ***
  • Posts: 3439
  • Pogi/Ganda Points: 123
  • Truth suffers, but never dies.
Re: i am in need of ELECTRONICS ENGINEER... for my project
« Reply #8 on: November 16, 2008, 09:41:35 PM »

@ Jonan

Sir tama po sila napakasimply po ng ipigagawa nyo, ang problema lang yong Polonium.....

Is this circuit is meant to test an active Polonium or an inactive Polonium Ore?

Do you already have a test/calibration procedure for this? 
It's difficult to see the picture when you're inside the frame.

Offline jonan_laze77

  • LR44 Battery
  • *
  • Posts: 6
  • Pogi/Ganda Points: 0
Re: i am in need of ELECTRONICS ENGINEER... for my project
« Reply #9 on: November 17, 2008, 09:39:17 PM »
SALAMAT po sa lahat nang nagbigay ng kanilang mga opinyon at saloobin.

=)

ahm.. ung sa radioactive material naman po.. it can really be tested sa mga may COCKTAILS at matatapang na WINE ..BEER.. and all stuffs.... so maybe, i just have to find such beverages po na matapang..so i can see a bit of Polonium in them.

the one who invented this project was from AMERICA..amerkano po siya at naka-usap ko na siya through email at posible nga naman daw tlaga ito.

so.. i know naman po sana na gagana ito. =)

so.. i just have to find electricians po right? or any hobbyist ..or the like.
i just have to show them the circuit through the schematic?..tama po?.
..ahm. ano pa po ba.

the materials are easy naman po right.. i can find them naman.

salamat po sa evalution. ..one last favor.

i hope you can give me tips or anything that can help me again.

thank you very much everybody.,
aking mga sir. =) hehe

Offline RaffT

  • Technical People
  • Hydroelectric
  • *****
  • Posts: 3440
  • Pogi/Ganda Points: 103
  • Gender: Male
  • more on R-n-D
    • MY Bots
Re: i am in need of ELECTRONICS ENGINEER... for my project
« Reply #10 on: November 17, 2008, 10:39:07 PM »
^^hmm ma GOGEL nga yan "polonium" pen  ;D

pero I have seen that circuit(or something similar) para yata yang negative or positive ion detector... maybe named polonium para fancy...


PERO sure lang ako detector talaga gamit nyan...

EDIT:

 detector nga.. hehe

http://www.engadget.com/2007/12/01/diy-polonium-detector-makes-barhopping-safer/


Learning is CooL! BEAM robotics/DIY UCD180/PSP/AC wtmtr/digiESRmtr/PICkit™2 clone/SGTC/SSTC/DR-SSTC

Never argue with an idiot... They'll take you down to their level and beat you with experience

Offline jonan_laze77

  • LR44 Battery
  • *
  • Posts: 6
  • Pogi/Ganda Points: 0
Re: i am in need of ELECTRONICS ENGINEER... for my project
« Reply #11 on: November 18, 2008, 09:43:14 PM »
thank you very much sir for the info.. salamat po tlga.

Offline maldihtah13

  • Technical People
  • Nuclear Reactor
  • *****
  • Posts: 4669
  • Pogi/Ganda Points: 120
  • Gender: Female
  • Everyday is a learning process so try to learn ;D
    • Blogspot
Re: i am in need of ELECTRONICS ENGINEER... for my project
« Reply #12 on: November 19, 2008, 04:31:18 AM »
If you need assistance sa radio active material at mga radio active detector or anuman just pm me. I know someone from PNRI (Philippine Nuclear Research Institute) that can help you regarding this matter. Indicate mo na rin kung tga saan ka.

Offline e.novacek

  • Size D Battery
  • ******
  • Posts: 292
  • Pogi/Ganda Points: 62
  • Gender: Male
  • The LionHeart
Re: i am in need of ELECTRONICS ENGINEER... for my project
« Reply #13 on: November 19, 2008, 05:47:59 PM »
Polonium is a dangerous radioactive material, So I suggest to handle and take good care properly in creating your project if are about to build this so-called Polonium Pen.

If I remember exactly, dito namatay si Marie Curie pati ung asawa niya sa radiation poisoning.

ingat lang brod..
Take the gun. Leave the cannoli.
-Mario Puzo

Offline ~wind~

  • CR2032 Battery
  • **
  • Posts: 42
  • Pogi/Ganda Points: 2
  • Gender: Male
Re: i am in need of ELECTRONICS ENGINEER... for my project
« Reply #14 on: November 19, 2008, 06:44:27 PM »
it seems to focus more on the study physics..

based nmn sa schem circuit..  simple lang sya... the challenge lang I think is the size and yung sinasabi nilang health hazard..
Ang pagiging matuwid ay wala sa dami ng posts!

Offline underprezzure

  • Lead Acid Battery
  • *******
  • Posts: 913
  • Pogi/Ganda Points: 44
  • Gender: Male
  • Destroyer! Web Crawler! Buster! Babaylan!
    • www.instructables.com
Re: i am in need of ELECTRONICS ENGINEER... for my project
« Reply #15 on: November 19, 2008, 07:15:20 PM »
Ngayon ko lang ito nabasa ah... Well, that American the thread starter has mentioned probably is based in Washington but anywayz, I dont have to argue much on what the thread starter wants to do. Because it is already done. All I can argue is the calibration. This is where the physicists are looking into. Questions like how much is the rated polonium can be detected per volume of liquid? To what extent is it's sensitivity level is reliably acceptable? and many more...

well, without further delay, here is the complete details of this project.

Read it once, understand it twice, calibrate the device a million times!

EDIT: By the way, what hazards are the other members are talking about?  :P  ::)  ;D  ;D hehehehehehe


-underpazz campaigns for more technical post on technical threads
-underpazz campaigns for "no hijack policy" on technical sections
I am not reinventing the wheel, I am just making a difference.
Follow Forum Rules and Regulations
Search the forum before posting
Zero tolerance on spam
Stop thread hijack

Offline ♪ ♫ ♫ ♪ ♪ ♪ ♫ ♫ ♫

  • Hydroelectric
  • ***
  • Posts: 3439
  • Pogi/Ganda Points: 123
  • Truth suffers, but never dies.
Re: i am in need of ELECTRONICS ENGINEER... for my project
« Reply #16 on: November 19, 2008, 10:19:04 PM »

yeah tama si sis underpazz....

@ Johan_laze

May we know sir what is the threshold ppm of polonium the radioactive pen detects....
It's difficult to see the picture when you're inside the frame.

Offline pishboy

  • Size AA Battery
  • ****
  • Posts: 105
  • Pogi/Ganda Points: 2
  • Gender: Male
  • Eternal Flame
    • bosshardhans.comuf.com
Re: i am in need of ELECTRONICS ENGINEER... for my project
« Reply #17 on: December 12, 2010, 03:17:41 PM »
kaya po ito, gayahin lang yung schematic. 11 pa lang ako nung natutong gumawa ng electronic circuits eh. Siguro kailangan natin ito lalong lalo na sa bangayan ng N. at S. korea
-pirma-

Offline m@r

  • Diesel Generator
  • *
  • Posts: 1847
  • Pogi/Ganda Points: 59
  • Gender: Male
Re: i am in need of ELECTRONICS ENGINEER... for my project
« Reply #18 on: December 12, 2010, 03:36:21 PM »
ngekkkk...2008 pa ito ah! hahahah
it's not how much what we have but it's how we used what we have...

Offline pishboy

  • Size AA Battery
  • ****
  • Posts: 105
  • Pogi/Ganda Points: 2
  • Gender: Male
  • Eternal Flame
    • bosshardhans.comuf.com
Re: i am in need of ELECTRONICS ENGINEER... for my project
« Reply #19 on: December 12, 2010, 04:44:41 PM »
ay sori di ko nakita
-pirma-

Philippine Electronics Forum

Re: i am in need of ELECTRONICS ENGINEER... for my project
« Reply #19 on: December 12, 2010, 04:44:41 PM »

 

Privacy Policy

Contact Us: elabph@yahoo.com