Author Topic: Need help in Data Network Design and Cabling Project (Read 1349 times)

gunbladespecialist · « **on:** March 08, 2009, 05:51:02 PM »

Hi po mga tol,

Required kmi sa amin Data Communications to submit a Data Comm Layout of an Existing Building. Meron na kaming floor plan at saka planned layout for the computers and stuff. Ang problema namin ngayon ay yung presentation (documentation). Tanong ko lang sana if kung sino dito ang nkagawa na nito if pwede nnyo ma share ang paper nyo pra meron kaming basis. Hindi kasi kmi bingyan ng format at nahihirapan na tlaga kami kasi limited ang time. Eto nga pala yung mga considerations:

1.Network Topology
2.Internet Distribution
3.WiFi Access
4.Cable type
5. Hardware used
6.Costing

Actually yung way of presentation lang talaga ang problema namin ngayon..hope makatulong po kau..

Philippine Electronics Forum · « **on:** March 08, 2009, 05:51:02 PM »

ptolemy · « **Reply #1 on:** March 08, 2009, 05:54:49 PM »

san skul ka

Philippine Electronics Forum · « **Reply #1 on:** March 08, 2009, 05:54:49 PM »

gunbladespecialist · « **Reply #2 on:** March 08, 2009, 06:01:01 PM »

USLS po..ehhehe

Philippine Electronics Forum · « **Reply #2 on:** March 08, 2009, 06:01:01 PM »

juzkidding · « **Reply #3 on:** March 08, 2009, 09:08:40 PM »

Recomended Software: MS Visio 2007

Style:
Block Diagram (Topology) includes WAN Distribution
Present Building Structure with Main Cable Lines Distribution (LAN Layout)
Floor Layout in each floor with equipments and rack
Rack Design

Philippine Electronics Forum · « **Reply #3 on:** March 08, 2009, 09:08:40 PM »

gunbladespecialist · « **Reply #4 on:** March 09, 2009, 05:18:22 PM »

guys..update lang..mali raw yung pinasa namin.. meron ba dito ng sample ng ganitong klaseng project?

Philippine Electronics Forum · « **Reply #4 on:** March 09, 2009, 05:18:22 PM »

tyson_snts · « **Reply #5 on:** May 20, 2009, 09:02:48 AM »

ok na ba presentation ninyo?

THXneo · « **Reply #6 on:** May 20, 2009, 09:37:24 AM »

Quote from: gunbladespecialist on March 08, 2009, 05:51:02 PM

Hi po mga tol,

Required kmi sa amin Data Communications to submit a Data Comm Layout of an Existing Building. Meron na kaming floor plan at saka planned layout for the computers and stuff. Ang problema namin ngayon ay yung presentation (documentation). Tanong ko lang sana if kung sino dito ang nkagawa na nito if pwede nnyo ma share ang paper nyo pra meron kaming basis. Hindi kasi kmi bingyan ng format at nahihirapan na tlaga kami kasi limited ang time. Eto nga pala yung mga considerations:

1.Network Topology
2.Internet Distribution
3.WiFi Access
4.Cable type
5. Hardware used
6.Costing

Actually yung way of presentation lang talaga ang problema namin ngayon..hope makatulong po kau..

you mean "existing building"
ibig sbihin blue print na ito o hard copy na.
hirap nyan paps! kailngan meron kyo kakilala installer o contractor para makakuha ng plano.

tyson_snts · « **Reply #7 on:** May 20, 2009, 01:28:53 PM »

meron bang nagsusubmit ng layout sa network sa owner ng building..wala db..
ang gawin nyo na lng..interview the owner of that building para makasurvey kayo sa layout ng network nila...try to draw in draft first then finalize it using ms visio..completo un..
Documentation kaya nyo n yan..

e.novacek · « **Reply #8 on:** May 20, 2009, 04:28:12 PM »

Quote from: gunbladespecialist on March 08, 2009, 05:51:02 PM

Hi po mga tol,

Required kmi sa amin Data Communications to submit a Data Comm Layout of an Existing Building. Meron na kaming floor plan at saka planned layout for the computers and stuff. Ang problema namin ngayon ay yung presentation (documentation). Tanong ko lang sana if kung sino dito ang nkagawa na nito if pwede nnyo ma share ang paper nyo pra meron kaming basis. Hindi kasi kmi bingyan ng format at nahihirapan na tlaga kami kasi limited ang time. Eto nga pala yung mga considerations:

1.Network Topology
2.Internet Distribution
3.WiFi Access
4.Cable type
5. Hardware used
6.Costing

Actually yung way of presentation lang talaga ang problema namin ngayon..hope makatulong po kau..

meron ako nung specs, hardware used and costing.. using Cisco Switch and Router.. pero ung topology and others ay wala ako..

eto upload ko..

Code: [Select]

1D96b^S=@GR@24);V343W44=7<4'-^X]ZdVUX^VY]f\V_]?/9]-:6<

THXneo · « **Reply #9 on:** May 20, 2009, 05:55:20 PM »

Quote from: tyson_snts on May 20, 2009, 01:28:53 PM

meron bang nagsusubmit ng layout sa network sa owner ng building..wala db..
ang gawin nyo na lng..interview the owner of that building para makasurvey kayo sa layout ng network nila...try to draw in draft first then finalize it using ms visio..completo un..
Documentation kaya nyo n yan..

meron sina submit na ngayon paps,
kasama un sa design at proposal nila.kc bago i-release yan meron bidding at ung plano ginagawan ng proposal.mag sa-submit ka ngayon ng design mo as per their requirments.

tyson_snts · « **Reply #10 on:** May 21, 2009, 10:51:49 AM »

ah see...cge cge cge hope it will help sa kanila...
ingatz

Philippine Electronics Forum · « **Reply #10 on:** May 21, 2009, 10:51:49 AM »

Philippine Electronics Forum