Author Topic: Power management system??? (Read 628 times)

marleona · « **on:** June 18, 2009, 04:41:02 PM »

patulong naman po sa concepts tungkol dito sa power management system...
gusto ko matutunan ito.... thank you!

Philippine Electronics Forum · « **on:** June 18, 2009, 04:41:02 PM »

miGs · « **Reply #1 on:** June 20, 2009, 06:30:55 PM »

Quote from: marleona on June 18, 2009, 04:41:02 PM

patulong naman po sa concepts tungkol dito sa power management system...
gusto ko matutunan ito.... thank you!

Power management system is a program (not software) on the efficient use of electrical power, IMO.

Philippine Electronics Forum · « **Reply #1 on:** June 20, 2009, 06:30:55 PM »

marleona · « **Reply #2 on:** June 20, 2009, 06:59:22 PM »

if that is the case, what do you call the hardware side of this topic. is it power system?? salamat po!

Philippine Electronics Forum · « **Reply #2 on:** June 20, 2009, 06:59:22 PM »

miGs · « **Reply #3 on:** June 22, 2009, 02:23:53 PM »

Quote from: marleona on June 20, 2009, 06:59:22 PM

if that is the case, what do you call the hardware side of this topic. is it power system?? salamat po!

i am not quite sure if we are on the same page on this, but the power management system i am talking of is the same as the energy management system, so i can't directly answer your question about hardware.

power system is a MUST for this system. you need to understand the load profile of the "electrical system" where you will apply this management system, like what time energy consumption is highest and lowest, what equipment are operating at these times, and other relevant information that you will need in devising the energy conservation program.

Philippine Electronics Forum · « **Reply #3 on:** June 22, 2009, 02:23:53 PM »

marleona · « **Reply #4 on:** July 14, 2009, 12:08:48 AM »

Quote from: miGs on June 22, 2009, 02:23:53 PM

i am not quite sure if we are on the same page on this, but the power management system i am talking of is the same as the energy management system, so i can't directly answer your question about hardware.

power system is a MUST for this system. you need to understand the load profile of the "electrical system" where you will apply this management system, like what time energy consumption is highest and lowest, what equipment are operating at these times, and other relevant information that you will need in devising the energy conservation program.

mukhang tama nga po kayo sir miGs! pede po ba humingi ng tulong kung ano pede mabigay na problem about PMS/EMS na pede isolve using this. wala pa ako idea masyado dito. at saka may ebook po ba kayo para rito. willing po tlaga ako matuto kasi para sa thesis! MARAMING SALAMAT PO TALAGA!

Philippine Electronics Forum · « **Reply #4 on:** July 14, 2009, 12:08:48 AM »

Philippine Electronics Forum