Author Topic: Can you swap the boards of CFLs and fix it? (Read 1678 times)

Akon · « **on:** March 06, 2008, 08:19:35 PM »

I have 5 defective CFLS, they are all the same brand and model. I was thinking of checking wether the bulb is defective or their circuit board is defective. If i got a good bulb I would find a good board and install it with the functional bulb.

Philippine Electronics Forum · « **on:** March 06, 2008, 08:19:35 PM »

Siramiko · « **Reply #1 on:** March 06, 2008, 08:23:11 PM »

Quote from: Akon on March 06, 2008, 08:19:35 PM

I have 5 defective CFLS, they are all the same brand and model. I was thinking of checking wether the bulb is defective or their circuit board is defective. If i got a good bulb I would find a good board and install it with the functional bulb.

gusto ko rin gawin dati yan.

Philippine Electronics Forum · « **Reply #1 on:** March 06, 2008, 08:23:11 PM »

Shey · « **Reply #2 on:** March 06, 2008, 09:09:27 PM »

May pinakita sa TV na expose tungkol diyan. Yung mga pundido na CFL ni-rerecyle at nererepair yung mga circuit boards tapos pinagbibili ulit as "brand new"

..

Philippine Electronics Forum · « **Reply #2 on:** March 06, 2008, 09:09:27 PM »

express · « **Reply #3 on:** March 06, 2008, 11:28:50 PM »

Quote from: Akon on March 06, 2008, 08:19:35 PM

I have 5 defective CFLS, they are all the same brand and model. I was thinking of checking wether the bulb is defective or their circuit board is defective. If i got a good bulb I would find a good board and install it with the functional bulb.

Pwede. Nice idea:) Pa-update na lang bro.

Philippine Electronics Forum · « **Reply #3 on:** March 06, 2008, 11:28:50 PM »

robbietan · « **Reply #4 on:** March 07, 2008, 08:38:47 AM »

ang alam ko the common problem for cfl circuits are blown capacitors sa power supply circuit nya. kadalasan kasi underrated ang capacitors na nilalagay sa mga murang brands.

Philippine Electronics Forum · « **Reply #4 on:** March 07, 2008, 08:38:47 AM »

Ikasamoko · « **Reply #5 on:** March 07, 2008, 09:32:35 AM »

pwede...bihira masira yung bulb kadalasan yung driver ckt nasisira..

jhamir · « **Reply #6 on:** March 28, 2008, 10:23:33 PM »

mas maganda gmitin na electronic part ng fls ungsa mga branded kc kalimitan bulb nacicira dahil sa katagalan... tapo ung sa mahinang brand nacicira ung mga electronic part... ginagamit ko ung bulb nila partner nung electronic nung isa kya na rerecycle ko ulit hope makatulong ako

1110000 · « **Reply #7 on:** May 14, 2008, 03:52:41 PM »

ako ginagamit ko naman yung circuit nya for driving large tubes

01110011 · « **Reply #8 on:** November 30, 2011, 05:56:48 PM »

pwede yung circuit nya na makapag drive ng flourescent tube na katumbas ng wattage ng cfl

bravokilo · « **Reply #9 on:** December 12, 2011, 10:48:24 AM »

yep, you can do all of the above....tama yun kunin nyo ang circuito ng good brand, buy cheapies at ipad ang bulb.

Also, you cna use the circuit sa ordinary tube bulb like 10, 20 watts. electronic ballast yan.

BK

mult · « **Reply #10 on:** January 31, 2012, 10:12:35 PM »

sa ccfl na bulb ang ginagawa kodyan e bomili ng 10 watts na balast @ stater @ yon may elaw kana philips ang brand tomawa yong kapit bahay ko dahil namomolut ako da basura ng bulb toma din po ako dahil naka save na po ako sa gastosin marami naakong reserve na bombilya na ccfl wala silang alam diyan mag ingat lang pag bokas ng ccfl baka pomo tok sakamay mo pomonta ang mercury ......

Philippine Electronics Forum · « **Reply #10 on:** January 31, 2012, 10:12:35 PM »

Philippine Electronics Forum