Author Topic: samsung 29" slim fit tv (Read 1079 times)

madjest3r · « **on:** July 16, 2009, 05:42:22 PM »

history; putol kbitan nya ng antena/cable
so niresolder ko nlng gmit 60wats n solder iron

nung kbitan ko na ng cable via cable cnverter

my tao nman kaya lang kulay talong,kulay green,

kulay pink ung mukha ng tao, di cxa mkapgproduce ng

white background, try ko sa video ok ganda ng kulay

natry ko n rin i-on ung PIP nya parho panget kulay...

any suggesyion mga ka elab?

?

natry ko rin ung cable nya s ibang tv ok nman

Philippine Electronics Forum · « **on:** July 16, 2009, 05:42:22 PM »

nath630 · « **Reply #1 on:** July 16, 2009, 06:18:57 PM »

sir, sa aerial(outdoor) antenna nasubukan mo na?

teka po, anong kabitan ng antenna po ba sinasabi nyo? yung matching transformer po ba? o yung Tuner ng set? double check nalang po yung pagkasolder..

kung yung tuner mismo ni solder nyo...baka nagkaproblema...

Philippine Electronics Forum · « **Reply #1 on:** July 16, 2009, 06:18:57 PM »

thorshz · « **Reply #2 on:** July 18, 2009, 06:59:49 PM »

tama si nath630 baka may cold soldered, kasi nagagalaw madalas ang tner pag-kinakabitan ng antenna...

Philippine Electronics Forum · « **Reply #2 on:** July 18, 2009, 06:59:49 PM »

Jhunics · « **Reply #3 on:** July 18, 2009, 08:07:13 PM »

paki buksan po mismo yung tuner at check for cold solder

Philippine Electronics Forum · « **Reply #3 on:** July 18, 2009, 08:07:13 PM »

madjest3r · « **Reply #4 on:** July 25, 2009, 02:59:56 PM »

update lng.... nasolder ko na ung loob ng tuner

bago ko pa ikabit ung dulo ng tuner n nputol

natataka ako bkit pti ung PIP nya panget ang picture

kung s tuner ang prblem eh di ba ble 2 tuner un

Philippine Electronics Forum · « **Reply #4 on:** July 25, 2009, 02:59:56 PM »

charlie · « **Reply #5 on:** July 27, 2009, 09:25:33 AM »

sir to isolate the troble para malaman mo sira kabitan mo ng tuner subber gamit ka iba tuner kahit di pihit lng kailangan mo lng agc, if, gnd at supply. sana makatulong.

Philippine Electronics Forum · « **Reply #5 on:** July 27, 2009, 09:25:33 AM »

Philippine Electronics Forum